Building Loads Calculation
Building - For versions: 2010
|
| |
| |
Interface Overview
Building - For versions: 2010
In this video we will show how the main screen has been laid out in order to understand how to move throughout it.
|
| |
| |
Location
Building - For versions: 2010
It shows how to set the design location and other general project general parameters.
|
| |
| |
Add Levels & Xref Building Plan Drawing
Building - For versions: 2010
This video shows you how to specify the levels of a two-story house, how to specify the plan drawing to each of them and how to vertically align them.
|
| |
| |
Building Input - External Walls
Building - For versions: 2010
In this video it is possible to see how to trace the exterior lines of the plan drawing and make them walls used by the software to calculate the loads.
|
| |
| |
Building Input - Internal Walls
Building - For versions: 2010
It shows you how to define all internal spaces by drawing the interior walls.
|
| |
| |
Windows
Building - For versions: 2010
Windows substantially affect the load of the building; this video will show you how to define its thermal property and place them in the project.
|
| |
| |
Doors
Building - For versions: 2010
This video will show you how to set thermal and dimension parameters of doors and how to add them to the building.
|
| |
| |
Internal Design Condition
Building - For versions: 2010
In this video you will find the information about how to set the internal design condition of each space of the building.
|
| |
| |
Loads calculation & Reports
Building - For versions: 2010
Check the results and print the reports.
|
| |
| |
Project Settings
Radiant Panels - For versions: 2010
In this video we will set all the basic information to perform a radiant floor heating system dimensioning.
|
| |
| |
Radiant Area Detecting
Radiant Panels - For versions: 2010
This video shows you how to identify the radiant area (RayArea) of a specific space and how to set the spacing parameters which affect the maximum output allowed (maximum floor temperature).
|
| |
| |
Multiple RayAreas
Radiant Panels - For versions: 2010
In this video you will see how to supply the same room with two different manifolds (divide the main radiant area/rayarea in two different rayareas).
|
| |
| |
Manifold Displacement
Radiant Panels - For versions: 2010
Manifolds positioning is what is displayed in this video.
|
| |
| |
Manifold-RayArea Association
Radiant Panels - For versions: 2010
This video shows how to connect the rayarea to its supplying manifold. This operation is mandatory for the system sizing.
|
| |
| |
System Sizing
Radiant Panels - For versions: 2010
In this video the user will see how to set the supplying temperature, force a particular spacing override the heat rate required if necessary. The operations displayed in this video are really important for the comprehension of the program sizing process.
|
| |
| |
Circuit Drawing – Live Serpentine
Radiant Panels - For versions: 2010
This video shows you how to let the program draw the circuits inside a certain rayarea by using Live Serpentine command. It shows you how to get the desired layout and how to check all the solutions the program is able to produce.
|
| |
| |
Circuit Editing
Radiant Panels - For versions: 2010
In this video we go through all different ways to manipulate the automatic circuit drawing made by the program. You will learn how to change parameters in order to better fill the area or how to manually draw part of circuits and add them to the main circuit.
|
| |
| |
Leaders Drawing
Radiant Panels - For versions: 2010
This video shows you how to draw (with two different approaches) the leaders of the circuits and how to edit them and set different spacing parameters.
|
| |
| |
Circuits Auto Balancing
Radiant Panels - For versions: 2010
Break Circuit option. In this video you will see how the Break Circuit option produces more balanced circuits (same length).
|
| |
| |
