Keyboard ALT + g to toggle grid overlay

Update to Mc4Suite 2017

Allineamento alla licenza 2018

Adeguamento

Versione Completa

  • Adeguamento della versione 2017 alla licenza 2018

Corrections

HtCAD Module

  • Corretti errori di calcolo nel valore dei fabbisogni di energia termica utile per i servizi di climatizzazione in regime di calcolo intermittente (A3).
  • Corretti i valori limite per edifici pubblici ed a uso pubblico in Emilia Romagna
  • Corretto errore nella visualizzazione del valore del coefficiente globale di scambio termico per trasmissione (H’T) per l'intero edificio, valore rappresentativo, ma non soggetto a confronto con valor limite.
  • Nella stampa della relazione di calcolo dell'edificio di riferimento per APE corretto il valore riepilogativo del fabbisogno di energia primaria per la climatizzazione invernale.
  • Corretta la funzionalità del wizard per la scelta dell'esponente caratteristico della curva dei terminali presente nei dati tipici dell'impianto termico nel caso di calcolo analitico delle perdite di distribuzione.
  • Corretto errore nel calcolo del fabbisogno energetico nel caso in cui si abbiano ore di non occupazione non nulle in regime di calcolo intermittente (A3).
  • Ripristinata in archivio comuni la visualizzazione dell'irradianza sul piano orizzontale nel mese di massima insolazione.
  • Corretti i valori limite di trasmittanza termica per edifici pubblici in Emilia Romagna.
  • Corretti i valori dei fattori di conversione in energia primaria per il teleriscaldamento esportati nei file XML relativi agli Attestati di Prestazione Energetica.
  • Recepita la revisione alla UNI 10349-1 relativa al valore della pressione di vapore nel mese di Maggio nella località di Carrara.
  • Corretta l'influenza del valore della potenza elettrica delle pompe di circolazione sull'indice di energia primaria per la produzione di acqua calda sanitaria.
  • Corretto errore di stampa del valore degli apporti solari nelle relazioni di calcolo invernale ed estiva.
  • Corretto, per l'applicazione della n. 967 del 20/07/2015, il valore minimo della potenza elettrica rinnovabile da installare.
  • Aggiunti i ponti termici di serramento nel calcolo della trasmittanza termica media di facciata per Riqualificazioni energetiche ed Interventi di ristrutturazione di II livello.
  • Aggiornate le intestazioni ed i piè di pagina della relazione prodotta in archivio strutture.
  • Nelle relazioni di calcolo dei fabbisogni di energia primaria per i vari servizi sostituita la dicitura "totale" con "globale" per quel che riguarda le grandezze date dalla somma dei parametri di vari servizi.
  • Aggiornate le informazioni relative al servizio trasporti esportate nel file XML per la Regione Emilia Romagna.
  • Aggiunte le informazioni relative alla produzione di energia elettrica da moduli fotovoltaici nella relazione di Legge per la Regione Emilia Romagna.

Migliorie/Nuove implementazioni

HtCAD Module

  • Aggiunto un warning che blocca il calcolo ed avvisa nel caso della presenza di serramenti aventi trasmittanza nulla.
  • Aggiunto un warning che blocca il calcolo ed avvisa nel caso di erronea compilazione del campo: Temperatura del fluido di prova circolante nel collettore [°C]
  • Aggiunti warning non bloccanti che avvisano l'utente in caso di mancato collegamento a qualche centrale elettrica di: centrali termiche, moduli fotovoltaici e sistemi di trasporti persone.
  • Aggiornato il file XML, alla versione 5, per gli Attestati di Prestazione Energetica prodotti nelle località della Regione Piemonte
  • Aggiornato il file XML, alla versione 12, per gli Attestati di Prestazione Energetica prodotti nelle località della Regione Marche

Correzioni/migliorie

HtCAD Module

  • Inserita l'influenza dei ponti termici nel calcolo della trasmittanza termica per interventi di "Ristrutturazione importante di II livello" e di "Riqualificazione energetica".
  • Corretta l’influenza dei locali non riscaldati nel calcolo del parametro H’T.
  • Aggiornati i valori limite sull’uso delle fonti rinnovabili in Regione Emilia Romagna.

Corrections

HtCAD Module

  • Corretto il valore dell'indice di energia primaria per la produzione id acqua calda sanitaria nell'attestato di prestazione energetica per la provincia autonoma di Trento.
  • Corretti errori di impaginazione nelle relazioni di calcolo degli edifici di riferimento per i Requisiti Minimi e per la certificazione energetica.
  • Corretto errore nella valutazione degli edifici di riferimento per i Requisiti Minimi e per la certificazione energetica nel caso di "riqualificazione energetica" con "Isolamento termico superficie opaca interna o isolamento intercapedine"
  • Aggiunti i totali stagionali dei valori riportati nelle tabelle: "Fabbisogno ideale di energia termica utile" e "Fabbisogni energetici ed apporti gratuiti" delle relazioni di calcolo degli edifici di riferimento.
  • Corretto il valore degli apporti solari e dell'extraflusso termico per radiazione infrarossa calcolati nei mesi parzialmente riscaldati o raffrescati.
  • Corretto errore di stampa nell'esportazione delle legende dei pannelli radianti nel file in formato "dwg" contenente la visualizzazione 2D del progetto.

Nuove implementazioni/migliorie

HtCAD Module

  • Relazione di calcolo dell'edificio di riferimento per i Requisiti Minimi: aggiunti resoconti di calcolo sui collettori solari, sul bilancio elettrico per l'energia elettrica prodotta on-site e sull'energia assorbita da cogenerazione.

Corrections

HtCAD Module

  • Corrected the Drag & Drop of the archive material structures
  • Reinserted the command functionality: copy-paste applied to the rooms.
  • Added the building address in the exported XML file for SIPEE portal for the Piedmont Region.
  • Corrected error in the distribution on the various spaces of the parts scope of the area.
  • Corrected the functionality of the check box "Fixed data" in "peak ventilation" in the extended data tab.
  • Corrected error in the electric absorption value printing of the auxiliary power supply circuits of thermal batteries in air handling units present in the summer and winter calculation reports.
  • Added warning that alerts the need to create the hydronic networks sizing calculation before producing the print report.
  • Corrected fatal error that is generated to the production of the consequent technical report to an economic assessment of an investment calculation.
  • Prevented the ability to enter a value of no factor equal to 1, illumination, in the extended data environment.
  • Restored the recirculation networks calculation.
  • Removed erroneous room message does not close that it stood at the exposure shift of exchanging borders.
  • In the extended data of the radiator, added fields "Description" and "Code" of the distribution.
  • Restored the placement of radiators and fan-coils at a predetermined distance from the wall.
  • Prolonged the validity, from 12/31/2016 to 12/31/2017, of the share of renewable limit value used for the services of heating, cooling, and domestic hot water, as required by Decree Mille extensions.
  • Corrected various errors in the energy requirements calculation for locations in the Trento Province
  • Removed failure to update the radiant systems list selectable in the case of the same importation in newly created files.
  • Corrected various errors in the XML exported files for SACE of the Emilia Romagna Region portal, including the combined system export.
  • Restored the ability of being able to hid e from view the radiant systems manifolds.
  • Restored the functionality that provides for the updating of building units in the transport list in the event that a change is made.
  • Corrected error involving the erroneous transcription of the time to start and end of winter heating in the winter calculation report.
  • Restored the ability to alter the degree days of a given location.

Corrections

HtCAD Module

  • Added the summer cooling and lighting services in the economic evaluation of energy-improvement measures.
  • Adapted conducting audits on the use of renewable sources to the systems type present in the project.
  • Inserted relevant fuels in boilers present in the database.
  • In the project's general data, eliminated the field "Full performance of the national electricity service", now replaced by the corresponding conversion factor for primary energy required by UNI/TS11300-5.
  • Corrected thermal transmittance calculation of thermal bridges: W13-SER.015 and IF1-SOL.005.
  • Corrected various errors in the economic evaluation procedure improvement initiatives.
  • Eliminated discrepancies in the printing of the dimensional data of some particular projects.
  • Inserted a connection between the change in field "Fraction of time in which it implements the airflow [0..1]" and activate the "Apply" button in the list areas and residential units.
  • Corrected several inaccuracies in the Attestation of Energy Performance Printing (APE)
  • Eliminated repetitions in various calculation reports of projects with more connected thermal power at a power station only.
  • Corrected the production of solar collectors in the case in which there is a solar production not extended to all the plants present for a given service.
  • Reinstated the requirement to enter the area covered only for those interventions that actually require the verification of installed electrical capacity.
  • Restored the calculation method "by standard" of the peak power of a photovoltaic field
  • Corrected the unit of measurement of the fields "Distance from the sea" and "Distance from the town" in the location database.
  • Eliminated the crash for the performance of the special projects law calculations.
  • Corrected the cooling zones period calculation with special conditions of thermal exchange.
  • In the Building Unit of the Radiant tab, under the heading "Type of installation" of the prevailing wall and additional partition wall, replaced the "preformed" option with "Prefabricated"
  • Eliminated the error for which the printing of solar projects in applications of the AutoCAD environment was sometimes produced without values.
  • Restored the ability to define photovoltaic modules with negative orientations.

FIreCAD Module

  • Restored the calculation with equivalent lengths of special pieces

Corrections

HtCAD Module

  • Corrected the allocation of wind zone of the various locations
  • Restored the calculation method "by standard" of the peak power of a photovoltaic field
  • Made visible again the value of the Primary Energy Saving (PES) of dual generator units
  • Eliminated the inability to select locations with the same name with special characters

New Implementations

HtCAD Module

  • Upgrade to Resolution 1515 of 09/02/2016 of the Autonomous Province of Trento.
  • Implemented the Regional Law n. 32 of 12/07/2016 of the Liguria Region. (*)
  • Implemented the D.G.R. n. 1715 of 10/24/2016 from the Emilia Romagna Region.
  • (*) The user is cautioned that selecting any location in the Liguria Region, the necessary capabilities to operate in accordance with the regional law will be operational while reading "DM Minimum requirements of 06/26/2015" in the general data of the project.

Improvements

HtCAD Module

  • Introduced the consumption for mechanical ventilation service between consumption adopted for the economic evaluation of energy-improvement measures.
  • Changed the definition mask of pipe systems present in the project. Adding the power plant and the ability to associate the services of mechanical ventilation, lighting, and transportation.
  • Added to the total of the share of renewable energy used in service at the relevant tables in the various calculation reports.

Corrections

HtCAD Module

  • Corrected the latitude of Tremezzina.
  • Elimination of the fatal error presented with the Attestation manual compilation of Energy Performance.
  • Included in the energy performance for central heating of the Autonomous Province of Trento the produced annual renewable energy has been added.
  • Corrected the index verification of useful energy in the winter verification of the NZEB buildings
  • Corrected the error in the compilation of the limit values of energy indicators for some special projects.
  • Corrected the index limit value of primary energy to be respected in the case of non-use of renewable sources, as required by the Ministerial Decree of Minimum Requirements.
  • In the case of energy upgrading made visible in the global performance values results mask with the respective limit values.
  • Corrected the display of special characters in the warnings list.
  • Entered the correct number of decimal in the electricity exported to the XML file produced by the Veneto Region.
  • Corrected the daily distribution of the time profile used for the calculation of thermal loads with the ASHRAE method.
  • Corrected the electric power value reported in the column Nominal power kW of the Attestation Performance Energy.
  • Corrected the value of electricity exported to the XML file for the Emilia Romagna Region.
  • Corrected the formula application (9) and (10) of the UNI/TS 11300:-1:2014.
  • Corrected the degrees in temperature in Viggianello.
  • Inserted the influence of thermal bridges in the transmission average value exported in the XML files produced for the Emilia Romagna Region.
  • Corrected the power consumption calculation of the auxiliary output for the summer air-conditioning service.
  • Corrected the dry bulb external winter temperatures value in Lamezia Terme.
  • Eliminated a discrepancy between transmittance display screen checks and reported in the press in building renovation interventions.

Duct Module

  • Corrected the metric calculation of the material in the channel release mask.

New Implementations

IMPROVEMENTS

HtCAD Module

  • Increased the default value of the accuracy of the materials thickness, roughness, and viscosity fields
  • Entered the unit of measure of the size "Recovery" in the calculation mask air systems in the AHU General Data
  • Improved the readability of the table with the dispersion coefficients for transmission in the calculation report in intermittent duty
  • Inserted seasonal total energy requirements listed in the tables "Energy Needs and free contributions" and "Needs ideal useful thermal energy" present in the winter and summer calculation reports
  • It increases the accuracy of the "Nu" field for the domestic hot water requirements for the destinations of nonresidential use
  • Updated the items loaded in the heat pumps archive
  • To assist the user in understanding of the errors committed, as well as display an appropriate warning for the results of previous calculations of the law are also hidden in the event that there is an input error that prevents the calculation
  • Added detail of ''Energy export produced in-situ" in the tables "Primary energy not renewable annual absorbed EP, NREN [kWh]","Annual renewable primary energy consumption EP, REN [kWh]", and "Total annual primary energy consumption EP, TOT [kWh]" in the various calculation reports
  • Added in the winter and summer calculation reports, tables covering the radiative heat fluxes and the structures used in the non-air conditioned environments
  • Adding the night closing influence in the calculation of the energy dispersed for extra heat flow
  • In accordance with the evaluation "A3" (tailored rating) automatic recalculation of the cold water inlet temperature for energy audit evaluations was eliminated
  • Added ability to select a town from the archive by a double click of the mouse
  • Improved the readability of the table "Final results of the project indicators" present in the various calculation reports
  • In the tables "Energy need input to generators Qx,gn,in [kWh]", "Annual consumption of energy carrier", and "CO2 Annual production [kg]" we added the influence held on all services from CHP unit present plans
  • Restored features in location archive filter to localities not Italian
  • Added to the index value of mechanical ventilation service the global index of total primary energy, is the actual reference building
  • Updated XML files for Energy Certification in the Umbria Region to version 11 (beta 5)
  • Inserted the Fermo province with its location

HVAC Module

  • Added the command icon "Regenerate dimensioned drawing"

Modulo Ht10200

  • Added simplified calculation of inadvertent consumption using the coefficients in Table 10 of the standard

CORRECTIONS

HtCAD Module

  • Calculation report for lighting, correct printing error that led to the repetition of the table "Central"
  • Eliminated warning not required on the non-completion of the temperature difference field in case it does not serve
  • Corrected the error in the editing area of the parameter "Minimum number of consecutive hours for which it has the temperature set-point reduced" tred, min, H in the case of intermittent operation scheme
  • Corrected various errors in the XML export files for the storage of energy performance certificates
  • Corrected error in calculation of the average annual temperature of cold tap water in the case of inputs of climate data from the step-by-step bar
  • Corrected various errors in the energy requirements calculation for locations in the Trento Province
  • Corrected the winter calculation and domestic hot water reports for the unit of measurement of the "Electrical Efficiency CHP unit" and "Thermal efficiency cogeneration unit" fields
  • In legal reports it has been eliminated failure to complete the "Electric power field installed plants fueled by renewable sources [kW]"
  • Eliminated the failure to recalculate the annual average temperature of cold water in case of change of location calculation
  • Correct failure to complete some data in the table "THE ENERGY NEEDS CALCULATION OF LIGHT" in the Reference building report for the energy performance certificate and the Minimum Requirements
  • Upgraded the archival facilities technical standard wording for review to the condensate: Appendix A UNI EN ISO 13788:2013
  • Corrected the climate zone of the Aviano municipality
  • Eliminated the failure to save the "volume flow rate [l/ h]" in a new solar collector
  • Added the municipalities of Molise and Castello di Serravalle
  • Updated the municipality names of San Dorligo della Valle-Dolina and Campolongo Tapogliano
  • Updated the local province of municipalities: Aggius, Aglientu, Agrate Brianza, Aicurzio, Ala dei sardi, Albiate, Andria, Arbus, Arcore, Arzachena, Arzana, Badesi, Sardinia Bari, Barlassina, Barletta, Barumini Baunei, Belgirate, Bellusco , Berchidda, Bernareggio, Besana in Brianza, Biassono, Bisceglie, Bortigiadas, Bosa, Bovisio, Bra, Briosco, Brugherio, Buddusò, Budoni, Buggerru, Burago Di Molgora, Busnago, Caccuri, Calangianus, Calasetta, Camparada, Canosa di Puglia, Caponago, Carate Brianza, Carbonia, Cardedu, Carlisle, Carnate, Castelsilano, Cavenago Di Brianza, Ceredigion, Ceriano Laghetto, Cesano Maderno, Cogliate, Colinas, Concorezzo, Cornate D'adda, Correzzana, Desio, Dinami, Domusnovas, Elini, Escalaplano, Escolca, Esterzili, Philadelphia, Fluminimaggiore, Flowerpot, Francavilla Angitola, Furtei, Gabicce Mare, Gairo, Genoni, Genuri, Gergei, Gesturi, Giba, Sunflower, Giussano, Gulf oranges, Gonnesa, Gonnosfanadiga, Gus, Guspini, Iglesias, Ilbono, Isili , Jerzu, La Maddalena, Laconi Lanusei, Las Plassas, Lazzate, Lentate Sul Seveso, Lesmo, Limbiate, Liss, Loceri, Loiri Porto San Paolo, Lotzorai, Lunamatrona, Luogosanto, Luras, Macherio, Madonna Del Sasso, Magomadas, Margherita di Savoy, Masainas, Meda, Mezzago, Minervino Murge, Misinto, Modolo, Monti, Monticello Brianza, Montresta, Monza, Muggia, Museums, Narcao, Nova Milanese, Nura, Nurallao, Nurri, Nuxis, Olbia, Ornago, Orroli, Oschiri, Osini , Pabillonis, Palau, Pauli Arbarei, Perdasdefogu, Perdaxius, Piscinas, Portoscuso, Portula, Renate, Roncello, Ronco Briantino, Sadali, Sagar, Samassi, San Colombano Al Lambro, San Ferdinando di Puglia, San Gavino Monreale, San Giovanni Suergiu, San Teodoro, Sanfrè, Sanluri, Santa Teresa di Gallura, Santadi, Sant'Anna Arresi, Sant'antioco, Sant'Antonio di Gallura, Sardara, Savelli, Segariu, Seregno, Serramanna, Serrenti, Serri, Setzu, Seui, Seulo, Seveso, Siddi, Sommariva Del Bosco, Sovico, Spinazzola, Sulbiate, Suni, Talana, Telti, Tempio, Tertenia, Tinnura, Tortolì, Trani, Tratalias, Triei, Trinita d'Agultu, Triuggio, Tuili Turri, Ulassai Urzulei, Usmate Velate, Ussaramanna, Ussassai, Varedo Vedano Al Lambro, Veduggio Con Colzano, Verano Brianza, Villa Del Bosco, Villacidro, Villagrande Strisaili, Villamar, Villamassargia, Villanova Tulo, Villanovaforru, Villanovafranca, Villaperuccio, Villasanta, Vimercate
  • Added the project value in summer temperature of the Law Report
  • Updated geographic data municipality names of: Alpago, AltaValle, Haut-Rhin Spa, Plateau, Amblar-Don, Bastida, Bienno, Borgo Churches, Borgo Lares, Borgomezzavalle, Campiglia Cervo, Casciana Lari, Castel Ivano, Castelfranco Piandiscò, Cavallino-Treporti , Cembra Lisignago, Comano Terme, Conta, Cornale, Crespina Lorenzana, Dimaro Folgarida, Di Vergemoli Factories, Fiscaglia, Gordon, Ledro, Lessona, Maccagno with Pino and Veddasca, Madruzzo, Montoro, Mosso, Pratovecchio Stia, Quero Vas, Pieve Di Bono -Price, Poggio Torriana, Polesine Zibello, Primiero San Martino Di Castrozza, Sella Giudicarie, Trecasali Sissa, Tre Ville, Val Di Zoldo, Valdaone, Vallelaghi, Valsamoggia, Valvasone Arzene, Ville D'Anaunia
  • Created in the location archive the province of Monza
  • Corrected error that led to the modification of the reference buildings features in case you operate energy upgrading with thermal insulation, internal opaque surface, or cavity insulation
  • Corrected a typo in the APE (Energy Performance Certificate)
  • Corrected loss of association of the manifold to its manifolds cassette archive
  • Eliminated the verification of the total limit solar transmission factor for windowed components for interventions: "Energetic Requalification" or "Major Renovations Level II"
  • Aggiunti i blocchi CAD mancanti nella directory: C:\ProgramData\Mc4Software\Mc4Suite 2017 ull\databases\Simb-mc4
  • Corrected error in the law report on the non-publication of the electrical output of photovoltaic systems in the section "Description and coverage ratios"
  • Corrected electrical energy distribution error absorbed by the primary pumps that serve more than one service (heating and production of sanitary hot water)
  • Corrected error of the solar collector volumetric flow rate display
  • The clustering for a thermal power station served of the various energy carriers shown in the table "Actual energy" of the Law Report
  • Eliminated the error messages that are generated during the production of winter calculation reports for particular projects
  • Added the missing data in the reference buildings calculation reports for Minimum Requirements for Energy and Certification, related to the ventilation and lighting services
  • Corrected the photovoltaic modules influence in: mechanical ventilation facilities, lighting, and transport for the reference building for Minimum Requirements
  • Corrected the renewable and non-renewable values indexes for the transportation service displayed
  • Corrected the photovoltaic modules influence in the summer air conditioning reference building's for energy certification
  • Corrected the primary energy indexes value for the primary ventilation in case the user has more thermal power plants projects
  • Eliminated the transport service influence in the energy classification of residential buildings
  • Eliminated error in the cold water annual average temperature calculation for those locations that have the same name in the location archive
  • Eliminated the auto-loading failure of the Decree of the Minimum Requirements in the general data for the Ligurian localities
  • Added into the law report that information concerning the generators that were missing.
  • Improve the layout of the Performance and Energy Certificates qualification products according to the National Guidelines of 06/26/2015

Modulo Ht10200

  • Corrected retail yields of radiators according to 10200

HVAC Module

  • Place the load losses in the damper in the channel sizing calculation
  • Removed software fatal error that manifested itself when the user entered an incorrect input in the diffusers archive, in particular defines an overall length of more flanges of the diffuser length
  • Corrected the error in the units of measurement display in the chart available from the calculation of "check + calculate actual capacities" of a water system

New Implementations

HtCAD Module

  • Updated the list of municipalities with the addition of new municipalities and the change of other climate data. Strongly advice to reload the climatic data of the locations in the projects initiated by previous versions of the software.

IMPROVEMENTS

HtCAD Module

  • In the "final results" section of the various calculation reports were displayed related to electricity information exported produced by cogeneration units.
  • Displayed in the winter, summer, and a.c.s. calculation reports the information related to the ventilation of each individual room.
  • Eliminated the requirement to run the drawing write command after modifying the mechanical ventilation data for the energy calculation according to UNI/TS 11300.

CORRECTIONS

  • Corrected the display error in the heat pump data labels with internal combustion engine.
  • Eliminated the thermal bridges placed in an unheated room in the reference buildings and the Minimum Requirements and Energy Performance Certification.
  • Corrected error in the distribution of electricity produced from cogeneration units in the case of simultaneous presence of photovoltaic and cogeneration.
  • Corrected database display problem of the municipalities with the same name.
  • Eliminated calculation results display error in the case id presence of a photovoltaic system can cover 100% of the requirements.
  • Eliminated systematic crash that occurs at the launch of the winter heat losses calculation on some installations.
  • Removed the summer heat maximum load month display error for locations not Italian.
  • Corrected the surface useful value walkable for summer air conditioning if not all areas of a building unit is equipped with facility.

Veneto Regional Energy Statement

  • Correct the exported XML file size for the regional information system.

New Implementations

HtCAD Module

  • Updated the reference building calculation report for the Minimum Requirements and Energy Certification.
  • Explained the items of the conversion factors in primary energy present in the General data.

IMPROVEMENTS

HtCAD Module

  • Updated the province and of belonging Region locations: Novafeltria, San Leo, Maiolo, Talamello, Casteldelci, Sant'Agata Feltria, and Pennabilli.

CORRECTIONS

L10 Appliances (Italian Energy calculation Law No. 10 in 1991)

  • Correct the photovoltaic modules influence in the reference building's lighting services for Energy Certification
  • Removed warning not required on completion of the ventilation data in an unheated room.
  • Removed warning on the thermostatic valve temperature in the case of the presence of heat pumps.
  • Added a filter for profiles displayed relating to thermal loads and to the use of profiles used for the summer power calculation.
  • Removed crash which manifested itself to the passage of data visualization of the effective reference building.
  • Updated summary table of the retaining floors input data.
  • Added the cadastral information in preview video Attestation Energy Performance (APE)
  • Corrected the failure to load the common project's climatic data in Jesolo.
  • Correct loading error of common data with an accent in their name.
  • Correct error in the calculation of the building of reference for the energy performance in the case of heat pump use.
  • Corrected the failure to load the common project's climatic data of the municipalities of Massa and Carrara.
  • Error corrected in loading the relative humidity data for locations other than those of climate data collection.
  • Corrected the reference buildings exchange coefficients printing error.
  • Added energy calculation use for unheated lighting.

Modulo Ht10200

  • Corrected the D.6 formula for the terminal power calculation.

Emilia Romagna Regional Energy Statement

  • Corrected the power consumption calculation of the auxiliary output for the summer air-conditioning service.

HtCad Module Autonomous Province of Trento

  • Restored the possibility of manual creation of the Energy Performance Certificates (APE).

Allineamento alla licenza 2018

Adeguamento

Versione Completa

  • Adeguamento della versione 2017 alla licenza 2018

Corrections

HtCAD Module

  • Corretti errori di calcolo nel valore dei fabbisogni di energia termica utile per i servizi di climatizzazione in regime di calcolo intermittente (A3).
  • Corretti i valori limite per edifici pubblici ed a uso pubblico in Emilia Romagna
  • Corretto errore nella visualizzazione del valore del coefficiente globale di scambio termico per trasmissione (H’T) per l'intero edificio, valore rappresentativo, ma non soggetto a confronto con valor limite.
  • Nella stampa della relazione di calcolo dell'edificio di riferimento per APE corretto il valore riepilogativo del fabbisogno di energia primaria per la climatizzazione invernale.
  • Corretta la funzionalità del wizard per la scelta dell'esponente caratteristico della curva dei terminali presente nei dati tipici dell'impianto termico nel caso di calcolo analitico delle perdite di distribuzione.
  • Corretto errore nel calcolo del fabbisogno energetico nel caso in cui si abbiano ore di non occupazione non nulle in regime di calcolo intermittente (A3).
  • Ripristinata in archivio comuni la visualizzazione dell'irradianza sul piano orizzontale nel mese di massima insolazione.
  • Corretti i valori limite di trasmittanza termica per edifici pubblici in Emilia Romagna.
  • Corretti i valori dei fattori di conversione in energia primaria per il teleriscaldamento esportati nei file XML relativi agli Attestati di Prestazione Energetica.
  • Recepita la revisione alla UNI 10349-1 relativa al valore della pressione di vapore nel mese di Maggio nella località di Carrara.
  • Corretta l'influenza del valore della potenza elettrica delle pompe di circolazione sull'indice di energia primaria per la produzione di acqua calda sanitaria.
  • Corretto errore di stampa del valore degli apporti solari nelle relazioni di calcolo invernale ed estiva.
  • Corretto, per l'applicazione della n. 967 del 20/07/2015, il valore minimo della potenza elettrica rinnovabile da installare.
  • Aggiunti i ponti termici di serramento nel calcolo della trasmittanza termica media di facciata per Riqualificazioni energetiche ed Interventi di ristrutturazione di II livello.
  • Aggiornate le intestazioni ed i piè di pagina della relazione prodotta in archivio strutture.
  • Nelle relazioni di calcolo dei fabbisogni di energia primaria per i vari servizi sostituita la dicitura "totale" con "globale" per quel che riguarda le grandezze date dalla somma dei parametri di vari servizi.
  • Aggiornate le informazioni relative al servizio trasporti esportate nel file XML per la Regione Emilia Romagna.
  • Aggiunte le informazioni relative alla produzione di energia elettrica da moduli fotovoltaici nella relazione di Legge per la Regione Emilia Romagna.

Migliorie/Nuove implementazioni

HtCAD Module

  • Aggiunto un warning che blocca il calcolo ed avvisa nel caso della presenza di serramenti aventi trasmittanza nulla.
  • Aggiunto un warning che blocca il calcolo ed avvisa nel caso di erronea compilazione del campo: Temperatura del fluido di prova circolante nel collettore [°C]
  • Aggiunti warning non bloccanti che avvisano l'utente in caso di mancato collegamento a qualche centrale elettrica di: centrali termiche, moduli fotovoltaici e sistemi di trasporti persone.
  • Aggiornato il file XML, alla versione 5, per gli Attestati di Prestazione Energetica prodotti nelle località della Regione Piemonte
  • Aggiornato il file XML, alla versione 12, per gli Attestati di Prestazione Energetica prodotti nelle località della Regione Marche

Correzioni/migliorie

HtCAD Module

  • Inserita l'influenza dei ponti termici nel calcolo della trasmittanza termica per interventi di "Ristrutturazione importante di II livello" e di "Riqualificazione energetica".
  • Corretta l’influenza dei locali non riscaldati nel calcolo del parametro H’T.
  • Aggiornati i valori limite sull’uso delle fonti rinnovabili in Regione Emilia Romagna.

Corrections

HtCAD Module

  • Corretto il valore dell'indice di energia primaria per la produzione id acqua calda sanitaria nell'attestato di prestazione energetica per la provincia autonoma di Trento.
  • Corretti errori di impaginazione nelle relazioni di calcolo degli edifici di riferimento per i Requisiti Minimi e per la certificazione energetica.
  • Corretto errore nella valutazione degli edifici di riferimento per i Requisiti Minimi e per la certificazione energetica nel caso di "riqualificazione energetica" con "Isolamento termico superficie opaca interna o isolamento intercapedine"
  • Aggiunti i totali stagionali dei valori riportati nelle tabelle: "Fabbisogno ideale di energia termica utile" e "Fabbisogni energetici ed apporti gratuiti" delle relazioni di calcolo degli edifici di riferimento.
  • Corretto il valore degli apporti solari e dell'extraflusso termico per radiazione infrarossa calcolati nei mesi parzialmente riscaldati o raffrescati.
  • Corretto errore di stampa nell'esportazione delle legende dei pannelli radianti nel file in formato "dwg" contenente la visualizzazione 2D del progetto.

Nuove implementazioni/migliorie

HtCAD Module

  • Relazione di calcolo dell'edificio di riferimento per i Requisiti Minimi: aggiunti resoconti di calcolo sui collettori solari, sul bilancio elettrico per l'energia elettrica prodotta on-site e sull'energia assorbita da cogenerazione.

Corrections

HtCAD Module

  • Corrected the Drag & Drop of the archive material structures
  • Reinserted the command functionality: copy-paste applied to the rooms.
  • Added the building address in the exported XML file for SIPEE portal for the Piedmont Region.
  • Corrected error in the distribution on the various spaces of the parts scope of the area.
  • Corrected the functionality of the check box "Fixed data" in "peak ventilation" in the extended data tab.
  • Corrected error in the electric absorption value printing of the auxiliary power supply circuits of thermal batteries in air handling units present in the summer and winter calculation reports.
  • Added warning that alerts the need to create the hydronic networks sizing calculation before producing the print report.
  • Corrected fatal error that is generated to the production of the consequent technical report to an economic assessment of an investment calculation.
  • Prevented the ability to enter a value of no factor equal to 1, illumination, in the extended data environment.
  • Restored the recirculation networks calculation.
  • Removed erroneous room message does not close that it stood at the exposure shift of exchanging borders.
  • In the extended data of the radiator, added fields "Description" and "Code" of the distribution.
  • Restored the placement of radiators and fan-coils at a predetermined distance from the wall.
  • Prolonged the validity, from 12/31/2016 to 12/31/2017, of the share of renewable limit value used for the services of heating, cooling, and domestic hot water, as required by Decree Mille extensions.
  • Corrected various errors in the energy requirements calculation for locations in the Trento Province
  • Removed failure to update the radiant systems list selectable in the case of the same importation in newly created files.
  • Corrected various errors in the XML exported files for SACE of the Emilia Romagna Region portal, including the combined system export.
  • Restored the ability of being able to hid e from view the radiant systems manifolds.
  • Restored the functionality that provides for the updating of building units in the transport list in the event that a change is made.
  • Corrected error involving the erroneous transcription of the time to start and end of winter heating in the winter calculation report.
  • Restored the ability to alter the degree days of a given location.

Corrections

HtCAD Module

  • Added the summer cooling and lighting services in the economic evaluation of energy-improvement measures.
  • Adapted conducting audits on the use of renewable sources to the systems type present in the project.
  • Inserted relevant fuels in boilers present in the database.
  • In the project's general data, eliminated the field "Full performance of the national electricity service", now replaced by the corresponding conversion factor for primary energy required by UNI/TS11300-5.
  • Corrected thermal transmittance calculation of thermal bridges: W13-SER.015 and IF1-SOL.005.
  • Corrected various errors in the economic evaluation procedure improvement initiatives.
  • Eliminated discrepancies in the printing of the dimensional data of some particular projects.
  • Inserted a connection between the change in field "Fraction of time in which it implements the airflow [0..1]" and activate the "Apply" button in the list areas and residential units.
  • Corrected several inaccuracies in the Attestation of Energy Performance Printing (APE)
  • Eliminated repetitions in various calculation reports of projects with more connected thermal power at a power station only.
  • Corrected the production of solar collectors in the case in which there is a solar production not extended to all the plants present for a given service.
  • Reinstated the requirement to enter the area covered only for those interventions that actually require the verification of installed electrical capacity.
  • Restored the calculation method "by standard" of the peak power of a photovoltaic field
  • Corrected the unit of measurement of the fields "Distance from the sea" and "Distance from the town" in the location database.
  • Eliminated the crash for the performance of the special projects law calculations.
  • Corrected the cooling zones period calculation with special conditions of thermal exchange.
  • In the Building Unit of the Radiant tab, under the heading "Type of installation" of the prevailing wall and additional partition wall, replaced the "preformed" option with "Prefabricated"
  • Eliminated the error for which the printing of solar projects in applications of the AutoCAD environment was sometimes produced without values.
  • Restored the ability to define photovoltaic modules with negative orientations.

FIreCAD Module

  • Restored the calculation with equivalent lengths of special pieces

Corrections

HtCAD Module

  • Corrected the allocation of wind zone of the various locations
  • Restored the calculation method "by standard" of the peak power of a photovoltaic field
  • Made visible again the value of the Primary Energy Saving (PES) of dual generator units
  • Eliminated the inability to select locations with the same name with special characters

New Implementations

HtCAD Module

  • Upgrade to Resolution 1515 of 09/02/2016 of the Autonomous Province of Trento.
  • Implemented the Regional Law n. 32 of 12/07/2016 of the Liguria Region. (*)
  • Implemented the D.G.R. n. 1715 of 10/24/2016 from the Emilia Romagna Region.
  • (*) The user is cautioned that selecting any location in the Liguria Region, the necessary capabilities to operate in accordance with the regional law will be operational while reading "DM Minimum requirements of 06/26/2015" in the general data of the project.

Improvements

HtCAD Module

  • Introduced the consumption for mechanical ventilation service between consumption adopted for the economic evaluation of energy-improvement measures.
  • Changed the definition mask of pipe systems present in the project. Adding the power plant and the ability to associate the services of mechanical ventilation, lighting, and transportation.
  • Added to the total of the share of renewable energy used in service at the relevant tables in the various calculation reports.

Corrections

HtCAD Module

  • Corrected the latitude of Tremezzina.
  • Elimination of the fatal error presented with the Attestation manual compilation of Energy Performance.
  • Included in the energy performance for central heating of the Autonomous Province of Trento the produced annual renewable energy has been added.
  • Corrected the index verification of useful energy in the winter verification of the NZEB buildings
  • Corrected the error in the compilation of the limit values of energy indicators for some special projects.
  • Corrected the index limit value of primary energy to be respected in the case of non-use of renewable sources, as required by the Ministerial Decree of Minimum Requirements.
  • In the case of energy upgrading made visible in the global performance values results mask with the respective limit values.
  • Corrected the display of special characters in the warnings list.
  • Entered the correct number of decimal in the electricity exported to the XML file produced by the Veneto Region.
  • Corrected the daily distribution of the time profile used for the calculation of thermal loads with the ASHRAE method.
  • Corrected the electric power value reported in the column Nominal power kW of the Attestation Performance Energy.
  • Corrected the value of electricity exported to the XML file for the Emilia Romagna Region.
  • Corrected the formula application (9) and (10) of the UNI/TS 11300:-1:2014.
  • Corrected the degrees in temperature in Viggianello.
  • Inserted the influence of thermal bridges in the transmission average value exported in the XML files produced for the Emilia Romagna Region.
  • Corrected the power consumption calculation of the auxiliary output for the summer air-conditioning service.
  • Corrected the dry bulb external winter temperatures value in Lamezia Terme.
  • Eliminated a discrepancy between transmittance display screen checks and reported in the press in building renovation interventions.

Duct Module

  • Corrected the metric calculation of the material in the channel release mask.

New Implementations

IMPROVEMENTS

HtCAD Module

  • Increased the default value of the accuracy of the materials thickness, roughness, and viscosity fields
  • Entered the unit of measure of the size "Recovery" in the calculation mask air systems in the AHU General Data
  • Improved the readability of the table with the dispersion coefficients for transmission in the calculation report in intermittent duty
  • Inserted seasonal total energy requirements listed in the tables "Energy Needs and free contributions" and "Needs ideal useful thermal energy" present in the winter and summer calculation reports
  • It increases the accuracy of the "Nu" field for the domestic hot water requirements for the destinations of nonresidential use
  • Updated the items loaded in the heat pumps archive
  • To assist the user in understanding of the errors committed, as well as display an appropriate warning for the results of previous calculations of the law are also hidden in the event that there is an input error that prevents the calculation
  • Added detail of ''Energy export produced in-situ" in the tables "Primary energy not renewable annual absorbed EP, NREN [kWh]","Annual renewable primary energy consumption EP, REN [kWh]", and "Total annual primary energy consumption EP, TOT [kWh]" in the various calculation reports
  • Added in the winter and summer calculation reports, tables covering the radiative heat fluxes and the structures used in the non-air conditioned environments
  • Adding the night closing influence in the calculation of the energy dispersed for extra heat flow
  • In accordance with the evaluation "A3" (tailored rating) automatic recalculation of the cold water inlet temperature for energy audit evaluations was eliminated
  • Added ability to select a town from the archive by a double click of the mouse
  • Improved the readability of the table "Final results of the project indicators" present in the various calculation reports
  • In the tables "Energy need input to generators Qx,gn,in [kWh]", "Annual consumption of energy carrier", and "CO2 Annual production [kg]" we added the influence held on all services from CHP unit present plans
  • Restored features in location archive filter to localities not Italian
  • Added to the index value of mechanical ventilation service the global index of total primary energy, is the actual reference building
  • Updated XML files for Energy Certification in the Umbria Region to version 11 (beta 5)
  • Inserted the Fermo province with its location

HVAC Module

  • Added the command icon "Regenerate dimensioned drawing"

Modulo Ht10200

  • Added simplified calculation of inadvertent consumption using the coefficients in Table 10 of the standard

CORRECTIONS

HtCAD Module

  • Calculation report for lighting, correct printing error that led to the repetition of the table "Central"
  • Eliminated warning not required on the non-completion of the temperature difference field in case it does not serve
  • Corrected the error in the editing area of the parameter "Minimum number of consecutive hours for which it has the temperature set-point reduced" tred, min, H in the case of intermittent operation scheme
  • Corrected various errors in the XML export files for the storage of energy performance certificates
  • Corrected error in calculation of the average annual temperature of cold tap water in the case of inputs of climate data from the step-by-step bar
  • Corrected various errors in the energy requirements calculation for locations in the Trento Province
  • Corrected the winter calculation and domestic hot water reports for the unit of measurement of the "Electrical Efficiency CHP unit" and "Thermal efficiency cogeneration unit" fields
  • In legal reports it has been eliminated failure to complete the "Electric power field installed plants fueled by renewable sources [kW]"
  • Eliminated the failure to recalculate the annual average temperature of cold water in case of change of location calculation
  • Correct failure to complete some data in the table "THE ENERGY NEEDS CALCULATION OF LIGHT" in the Reference building report for the energy performance certificate and the Minimum Requirements
  • Upgraded the archival facilities technical standard wording for review to the condensate: Appendix A UNI EN ISO 13788:2013
  • Corrected the climate zone of the Aviano municipality
  • Eliminated the failure to save the "volume flow rate [l/ h]" in a new solar collector
  • Added the municipalities of Molise and Castello di Serravalle
  • Updated the municipality names of San Dorligo della Valle-Dolina and Campolongo Tapogliano
  • Updated the local province of municipalities: Aggius, Aglientu, Agrate Brianza, Aicurzio, Ala dei sardi, Albiate, Andria, Arbus, Arcore, Arzachena, Arzana, Badesi, Sardinia Bari, Barlassina, Barletta, Barumini Baunei, Belgirate, Bellusco , Berchidda, Bernareggio, Besana in Brianza, Biassono, Bisceglie, Bortigiadas, Bosa, Bovisio, Bra, Briosco, Brugherio, Buddusò, Budoni, Buggerru, Burago Di Molgora, Busnago, Caccuri, Calangianus, Calasetta, Camparada, Canosa di Puglia, Caponago, Carate Brianza, Carbonia, Cardedu, Carlisle, Carnate, Castelsilano, Cavenago Di Brianza, Ceredigion, Ceriano Laghetto, Cesano Maderno, Cogliate, Colinas, Concorezzo, Cornate D'adda, Correzzana, Desio, Dinami, Domusnovas, Elini, Escalaplano, Escolca, Esterzili, Philadelphia, Fluminimaggiore, Flowerpot, Francavilla Angitola, Furtei, Gabicce Mare, Gairo, Genoni, Genuri, Gergei, Gesturi, Giba, Sunflower, Giussano, Gulf oranges, Gonnesa, Gonnosfanadiga, Gus, Guspini, Iglesias, Ilbono, Isili , Jerzu, La Maddalena, Laconi Lanusei, Las Plassas, Lazzate, Lentate Sul Seveso, Lesmo, Limbiate, Liss, Loceri, Loiri Porto San Paolo, Lotzorai, Lunamatrona, Luogosanto, Luras, Macherio, Madonna Del Sasso, Magomadas, Margherita di Savoy, Masainas, Meda, Mezzago, Minervino Murge, Misinto, Modolo, Monti, Monticello Brianza, Montresta, Monza, Muggia, Museums, Narcao, Nova Milanese, Nura, Nurallao, Nurri, Nuxis, Olbia, Ornago, Orroli, Oschiri, Osini , Pabillonis, Palau, Pauli Arbarei, Perdasdefogu, Perdaxius, Piscinas, Portoscuso, Portula, Renate, Roncello, Ronco Briantino, Sadali, Sagar, Samassi, San Colombano Al Lambro, San Ferdinando di Puglia, San Gavino Monreale, San Giovanni Suergiu, San Teodoro, Sanfrè, Sanluri, Santa Teresa di Gallura, Santadi, Sant'Anna Arresi, Sant'antioco, Sant'Antonio di Gallura, Sardara, Savelli, Segariu, Seregno, Serramanna, Serrenti, Serri, Setzu, Seui, Seulo, Seveso, Siddi, Sommariva Del Bosco, Sovico, Spinazzola, Sulbiate, Suni, Talana, Telti, Tempio, Tertenia, Tinnura, Tortolì, Trani, Tratalias, Triei, Trinita d'Agultu, Triuggio, Tuili Turri, Ulassai Urzulei, Usmate Velate, Ussaramanna, Ussassai, Varedo Vedano Al Lambro, Veduggio Con Colzano, Verano Brianza, Villa Del Bosco, Villacidro, Villagrande Strisaili, Villamar, Villamassargia, Villanova Tulo, Villanovaforru, Villanovafranca, Villaperuccio, Villasanta, Vimercate
  • Added the project value in summer temperature of the Law Report
  • Updated geographic data municipality names of: Alpago, AltaValle, Haut-Rhin Spa, Plateau, Amblar-Don, Bastida, Bienno, Borgo Churches, Borgo Lares, Borgomezzavalle, Campiglia Cervo, Casciana Lari, Castel Ivano, Castelfranco Piandiscò, Cavallino-Treporti , Cembra Lisignago, Comano Terme, Conta, Cornale, Crespina Lorenzana, Dimaro Folgarida, Di Vergemoli Factories, Fiscaglia, Gordon, Ledro, Lessona, Maccagno with Pino and Veddasca, Madruzzo, Montoro, Mosso, Pratovecchio Stia, Quero Vas, Pieve Di Bono -Price, Poggio Torriana, Polesine Zibello, Primiero San Martino Di Castrozza, Sella Giudicarie, Trecasali Sissa, Tre Ville, Val Di Zoldo, Valdaone, Vallelaghi, Valsamoggia, Valvasone Arzene, Ville D'Anaunia
  • Created in the location archive the province of Monza
  • Corrected error that led to the modification of the reference buildings features in case you operate energy upgrading with thermal insulation, internal opaque surface, or cavity insulation
  • Corrected a typo in the APE (Energy Performance Certificate)
  • Corrected loss of association of the manifold to its manifolds cassette archive
  • Eliminated the verification of the total limit solar transmission factor for windowed components for interventions: "Energetic Requalification" or "Major Renovations Level II"
  • Aggiunti i blocchi CAD mancanti nella directory: C:\ProgramData\Mc4Software\Mc4Suite 2017 ull\databases\Simb-mc4
  • Corrected error in the law report on the non-publication of the electrical output of photovoltaic systems in the section "Description and coverage ratios"
  • Corrected electrical energy distribution error absorbed by the primary pumps that serve more than one service (heating and production of sanitary hot water)
  • Corrected error of the solar collector volumetric flow rate display
  • The clustering for a thermal power station served of the various energy carriers shown in the table "Actual energy" of the Law Report
  • Eliminated the error messages that are generated during the production of winter calculation reports for particular projects
  • Added the missing data in the reference buildings calculation reports for Minimum Requirements for Energy and Certification, related to the ventilation and lighting services
  • Corrected the photovoltaic modules influence in: mechanical ventilation facilities, lighting, and transport for the reference building for Minimum Requirements
  • Corrected the renewable and non-renewable values indexes for the transportation service displayed
  • Corrected the photovoltaic modules influence in the summer air conditioning reference building's for energy certification
  • Corrected the primary energy indexes value for the primary ventilation in case the user has more thermal power plants projects
  • Eliminated the transport service influence in the energy classification of residential buildings
  • Eliminated error in the cold water annual average temperature calculation for those locations that have the same name in the location archive
  • Eliminated the auto-loading failure of the Decree of the Minimum Requirements in the general data for the Ligurian localities
  • Added into the law report that information concerning the generators that were missing.
  • Improve the layout of the Performance and Energy Certificates qualification products according to the National Guidelines of 06/26/2015

Modulo Ht10200

  • Corrected retail yields of radiators according to 10200

HVAC Module

  • Place the load losses in the damper in the channel sizing calculation
  • Removed software fatal error that manifested itself when the user entered an incorrect input in the diffusers archive, in particular defines an overall length of more flanges of the diffuser length
  • Corrected the error in the units of measurement display in the chart available from the calculation of "check + calculate actual capacities" of a water system

New Implementations

HtCAD Module

  • Updated the list of municipalities with the addition of new municipalities and the change of other climate data. Strongly advice to reload the climatic data of the locations in the projects initiated by previous versions of the software.

IMPROVEMENTS

HtCAD Module

  • In the "final results" section of the various calculation reports were displayed related to electricity information exported produced by cogeneration units.
  • Displayed in the winter, summer, and a.c.s. calculation reports the information related to the ventilation of each individual room.
  • Eliminated the requirement to run the drawing write command after modifying the mechanical ventilation data for the energy calculation according to UNI/TS 11300.

CORRECTIONS

  • Corrected the display error in the heat pump data labels with internal combustion engine.
  • Eliminated the thermal bridges placed in an unheated room in the reference buildings and the Minimum Requirements and Energy Performance Certification.
  • Corrected error in the distribution of electricity produced from cogeneration units in the case of simultaneous presence of photovoltaic and cogeneration.
  • Corrected database display problem of the municipalities with the same name.
  • Eliminated calculation results display error in the case id presence of a photovoltaic system can cover 100% of the requirements.
  • Eliminated systematic crash that occurs at the launch of the winter heat losses calculation on some installations.
  • Removed the summer heat maximum load month display error for locations not Italian.
  • Corrected the surface useful value walkable for summer air conditioning if not all areas of a building unit is equipped with facility.

Veneto Regional Energy Statement

  • Correct the exported XML file size for the regional information system.

New Implementations

HtCAD Module

  • Updated the reference building calculation report for the Minimum Requirements and Energy Certification.
  • Explained the items of the conversion factors in primary energy present in the General data.

IMPROVEMENTS

HtCAD Module

  • Updated the province and of belonging Region locations: Novafeltria, San Leo, Maiolo, Talamello, Casteldelci, Sant'Agata Feltria, and Pennabilli.

CORRECTIONS

L10 Appliances (Italian Energy calculation Law No. 10 in 1991)

  • Correct the photovoltaic modules influence in the reference building's lighting services for Energy Certification
  • Removed warning not required on completion of the ventilation data in an unheated room.
  • Removed warning on the thermostatic valve temperature in the case of the presence of heat pumps.
  • Added a filter for profiles displayed relating to thermal loads and to the use of profiles used for the summer power calculation.
  • Removed crash which manifested itself to the passage of data visualization of the effective reference building.
  • Updated summary table of the retaining floors input data.
  • Added the cadastral information in preview video Attestation Energy Performance (APE)
  • Corrected the failure to load the common project's climatic data in Jesolo.
  • Correct loading error of common data with an accent in their name.
  • Correct error in the calculation of the building of reference for the energy performance in the case of heat pump use.
  • Corrected the failure to load the common project's climatic data of the municipalities of Massa and Carrara.
  • Error corrected in loading the relative humidity data for locations other than those of climate data collection.
  • Corrected the reference buildings exchange coefficients printing error.
  • Added energy calculation use for unheated lighting.

Modulo Ht10200

  • Corrected the D.6 formula for the terminal power calculation.

Emilia Romagna Regional Energy Statement

  • Corrected the power consumption calculation of the auxiliary output for the summer air-conditioning service.

HtCad Module Autonomous Province of Trento

  • Restored the possibility of manual creation of the Energy Performance Certificates (APE).

Allineamento alla licenza 2018

Adeguamento

Versione Completa

  • Adeguamento della versione 2017 alla licenza 2018

Corrections

HtCAD Module

  • Corretti errori di calcolo nel valore dei fabbisogni di energia termica utile per i servizi di climatizzazione in regime di calcolo intermittente (A3).
  • Corretti i valori limite per edifici pubblici ed a uso pubblico in Emilia Romagna
  • Corretto errore nella visualizzazione del valore del coefficiente globale di scambio termico per trasmissione (H’T) per l'intero edificio, valore rappresentativo, ma non soggetto a confronto con valor limite.
  • Nella stampa della relazione di calcolo dell'edificio di riferimento per APE corretto il valore riepilogativo del fabbisogno di energia primaria per la climatizzazione invernale.
  • Corretta la funzionalità del wizard per la scelta dell'esponente caratteristico della curva dei terminali presente nei dati tipici dell'impianto termico nel caso di calcolo analitico delle perdite di distribuzione.
  • Corretto errore nel calcolo del fabbisogno energetico nel caso in cui si abbiano ore di non occupazione non nulle in regime di calcolo intermittente (A3).
  • Ripristinata in archivio comuni la visualizzazione dell'irradianza sul piano orizzontale nel mese di massima insolazione.
  • Corretti i valori limite di trasmittanza termica per edifici pubblici in Emilia Romagna.
  • Corretti i valori dei fattori di conversione in energia primaria per il teleriscaldamento esportati nei file XML relativi agli Attestati di Prestazione Energetica.
  • Recepita la revisione alla UNI 10349-1 relativa al valore della pressione di vapore nel mese di Maggio nella località di Carrara.
  • Corretta l'influenza del valore della potenza elettrica delle pompe di circolazione sull'indice di energia primaria per la produzione di acqua calda sanitaria.
  • Corretto errore di stampa del valore degli apporti solari nelle relazioni di calcolo invernale ed estiva.
  • Corretto, per l'applicazione della n. 967 del 20/07/2015, il valore minimo della potenza elettrica rinnovabile da installare.
  • Aggiunti i ponti termici di serramento nel calcolo della trasmittanza termica media di facciata per Riqualificazioni energetiche ed Interventi di ristrutturazione di II livello.
  • Aggiornate le intestazioni ed i piè di pagina della relazione prodotta in archivio strutture.
  • Nelle relazioni di calcolo dei fabbisogni di energia primaria per i vari servizi sostituita la dicitura "totale" con "globale" per quel che riguarda le grandezze date dalla somma dei parametri di vari servizi.
  • Aggiornate le informazioni relative al servizio trasporti esportate nel file XML per la Regione Emilia Romagna.
  • Aggiunte le informazioni relative alla produzione di energia elettrica da moduli fotovoltaici nella relazione di Legge per la Regione Emilia Romagna.

Migliorie/Nuove implementazioni

HtCAD Module

  • Aggiunto un warning che blocca il calcolo ed avvisa nel caso della presenza di serramenti aventi trasmittanza nulla.
  • Aggiunto un warning che blocca il calcolo ed avvisa nel caso di erronea compilazione del campo: Temperatura del fluido di prova circolante nel collettore [°C]
  • Aggiunti warning non bloccanti che avvisano l'utente in caso di mancato collegamento a qualche centrale elettrica di: centrali termiche, moduli fotovoltaici e sistemi di trasporti persone.
  • Aggiornato il file XML, alla versione 5, per gli Attestati di Prestazione Energetica prodotti nelle località della Regione Piemonte
  • Aggiornato il file XML, alla versione 12, per gli Attestati di Prestazione Energetica prodotti nelle località della Regione Marche

Correzioni/migliorie

HtCAD Module

  • Inserita l'influenza dei ponti termici nel calcolo della trasmittanza termica per interventi di "Ristrutturazione importante di II livello" e di "Riqualificazione energetica".
  • Corretta l’influenza dei locali non riscaldati nel calcolo del parametro H’T.
  • Aggiornati i valori limite sull’uso delle fonti rinnovabili in Regione Emilia Romagna.

Corrections

HtCAD Module

  • Corretto il valore dell'indice di energia primaria per la produzione id acqua calda sanitaria nell'attestato di prestazione energetica per la provincia autonoma di Trento.
  • Corretti errori di impaginazione nelle relazioni di calcolo degli edifici di riferimento per i Requisiti Minimi e per la certificazione energetica.
  • Corretto errore nella valutazione degli edifici di riferimento per i Requisiti Minimi e per la certificazione energetica nel caso di "riqualificazione energetica" con "Isolamento termico superficie opaca interna o isolamento intercapedine"
  • Aggiunti i totali stagionali dei valori riportati nelle tabelle: "Fabbisogno ideale di energia termica utile" e "Fabbisogni energetici ed apporti gratuiti" delle relazioni di calcolo degli edifici di riferimento.
  • Corretto il valore degli apporti solari e dell'extraflusso termico per radiazione infrarossa calcolati nei mesi parzialmente riscaldati o raffrescati.
  • Corretto errore di stampa nell'esportazione delle legende dei pannelli radianti nel file in formato "dwg" contenente la visualizzazione 2D del progetto.

Nuove implementazioni/migliorie

HtCAD Module

  • Relazione di calcolo dell'edificio di riferimento per i Requisiti Minimi: aggiunti resoconti di calcolo sui collettori solari, sul bilancio elettrico per l'energia elettrica prodotta on-site e sull'energia assorbita da cogenerazione.

Corrections

HtCAD Module

  • Corrected the Drag & Drop of the archive material structures
  • Reinserted the command functionality: copy-paste applied to the rooms.
  • Added the building address in the exported XML file for SIPEE portal for the Piedmont Region.
  • Corrected error in the distribution on the various spaces of the parts scope of the area.
  • Corrected the functionality of the check box "Fixed data" in "peak ventilation" in the extended data tab.
  • Corrected error in the electric absorption value printing of the auxiliary power supply circuits of thermal batteries in air handling units present in the summer and winter calculation reports.
  • Added warning that alerts the need to create the hydronic networks sizing calculation before producing the print report.
  • Corrected fatal error that is generated to the production of the consequent technical report to an economic assessment of an investment calculation.
  • Prevented the ability to enter a value of no factor equal to 1, illumination, in the extended data environment.
  • Restored the recirculation networks calculation.
  • Removed erroneous room message does not close that it stood at the exposure shift of exchanging borders.
  • In the extended data of the radiator, added fields "Description" and "Code" of the distribution.
  • Restored the placement of radiators and fan-coils at a predetermined distance from the wall.
  • Prolonged the validity, from 12/31/2016 to 12/31/2017, of the share of renewable limit value used for the services of heating, cooling, and domestic hot water, as required by Decree Mille extensions.
  • Corrected various errors in the energy requirements calculation for locations in the Trento Province
  • Removed failure to update the radiant systems list selectable in the case of the same importation in newly created files.
  • Corrected various errors in the XML exported files for SACE of the Emilia Romagna Region portal, including the combined system export.
  • Restored the ability of being able to hid e from view the radiant systems manifolds.
  • Restored the functionality that provides for the updating of building units in the transport list in the event that a change is made.
  • Corrected error involving the erroneous transcription of the time to start and end of winter heating in the winter calculation report.
  • Restored the ability to alter the degree days of a given location.

Corrections

HtCAD Module

  • Added the summer cooling and lighting services in the economic evaluation of energy-improvement measures.
  • Adapted conducting audits on the use of renewable sources to the systems type present in the project.
  • Inserted relevant fuels in boilers present in the database.
  • In the project's general data, eliminated the field "Full performance of the national electricity service", now replaced by the corresponding conversion factor for primary energy required by UNI/TS11300-5.
  • Corrected thermal transmittance calculation of thermal bridges: W13-SER.015 and IF1-SOL.005.
  • Corrected various errors in the economic evaluation procedure improvement initiatives.
  • Eliminated discrepancies in the printing of the dimensional data of some particular projects.
  • Inserted a connection between the change in field "Fraction of time in which it implements the airflow [0..1]" and activate the "Apply" button in the list areas and residential units.
  • Corrected several inaccuracies in the Attestation of Energy Performance Printing (APE)
  • Eliminated repetitions in various calculation reports of projects with more connected thermal power at a power station only.
  • Corrected the production of solar collectors in the case in which there is a solar production not extended to all the plants present for a given service.
  • Reinstated the requirement to enter the area covered only for those interventions that actually require the verification of installed electrical capacity.
  • Restored the calculation method "by standard" of the peak power of a photovoltaic field
  • Corrected the unit of measurement of the fields "Distance from the sea" and "Distance from the town" in the location database.
  • Eliminated the crash for the performance of the special projects law calculations.
  • Corrected the cooling zones period calculation with special conditions of thermal exchange.
  • In the Building Unit of the Radiant tab, under the heading "Type of installation" of the prevailing wall and additional partition wall, replaced the "preformed" option with "Prefabricated"
  • Eliminated the error for which the printing of solar projects in applications of the AutoCAD environment was sometimes produced without values.
  • Restored the ability to define photovoltaic modules with negative orientations.

FIreCAD Module

  • Restored the calculation with equivalent lengths of special pieces

Corrections

HtCAD Module

  • Corrected the allocation of wind zone of the various locations
  • Restored the calculation method "by standard" of the peak power of a photovoltaic field
  • Made visible again the value of the Primary Energy Saving (PES) of dual generator units
  • Eliminated the inability to select locations with the same name with special characters

New Implementations

HtCAD Module

  • Upgrade to Resolution 1515 of 09/02/2016 of the Autonomous Province of Trento.
  • Implemented the Regional Law n. 32 of 12/07/2016 of the Liguria Region. (*)
  • Implemented the D.G.R. n. 1715 of 10/24/2016 from the Emilia Romagna Region.
  • (*) The user is cautioned that selecting any location in the Liguria Region, the necessary capabilities to operate in accordance with the regional law will be operational while reading "DM Minimum requirements of 06/26/2015" in the general data of the project.

Improvements

HtCAD Module

  • Introduced the consumption for mechanical ventilation service between consumption adopted for the economic evaluation of energy-improvement measures.
  • Changed the definition mask of pipe systems present in the project. Adding the power plant and the ability to associate the services of mechanical ventilation, lighting, and transportation.
  • Added to the total of the share of renewable energy used in service at the relevant tables in the various calculation reports.

Corrections

HtCAD Module

  • Corrected the latitude of Tremezzina.
  • Elimination of the fatal error presented with the Attestation manual compilation of Energy Performance.
  • Included in the energy performance for central heating of the Autonomous Province of Trento the produced annual renewable energy has been added.
  • Corrected the index verification of useful energy in the winter verification of the NZEB buildings
  • Corrected the error in the compilation of the limit values of energy indicators for some special projects.
  • Corrected the index limit value of primary energy to be respected in the case of non-use of renewable sources, as required by the Ministerial Decree of Minimum Requirements.
  • In the case of energy upgrading made visible in the global performance values results mask with the respective limit values.
  • Corrected the display of special characters in the warnings list.
  • Entered the correct number of decimal in the electricity exported to the XML file produced by the Veneto Region.
  • Corrected the daily distribution of the time profile used for the calculation of thermal loads with the ASHRAE method.
  • Corrected the electric power value reported in the column Nominal power kW of the Attestation Performance Energy.
  • Corrected the value of electricity exported to the XML file for the Emilia Romagna Region.
  • Corrected the formula application (9) and (10) of the UNI/TS 11300:-1:2014.
  • Corrected the degrees in temperature in Viggianello.
  • Inserted the influence of thermal bridges in the transmission average value exported in the XML files produced for the Emilia Romagna Region.
  • Corrected the power consumption calculation of the auxiliary output for the summer air-conditioning service.
  • Corrected the dry bulb external winter temperatures value in Lamezia Terme.
  • Eliminated a discrepancy between transmittance display screen checks and reported in the press in building renovation interventions.

Duct Module

  • Corrected the metric calculation of the material in the channel release mask.

New Implementations

IMPROVEMENTS

HtCAD Module

  • Increased the default value of the accuracy of the materials thickness, roughness, and viscosity fields
  • Entered the unit of measure of the size "Recovery" in the calculation mask air systems in the AHU General Data
  • Improved the readability of the table with the dispersion coefficients for transmission in the calculation report in intermittent duty
  • Inserted seasonal total energy requirements listed in the tables "Energy Needs and free contributions" and "Needs ideal useful thermal energy" present in the winter and summer calculation reports
  • It increases the accuracy of the "Nu" field for the domestic hot water requirements for the destinations of nonresidential use
  • Updated the items loaded in the heat pumps archive
  • To assist the user in understanding of the errors committed, as well as display an appropriate warning for the results of previous calculations of the law are also hidden in the event that there is an input error that prevents the calculation
  • Added detail of ''Energy export produced in-situ" in the tables "Primary energy not renewable annual absorbed EP, NREN [kWh]","Annual renewable primary energy consumption EP, REN [kWh]", and "Total annual primary energy consumption EP, TOT [kWh]" in the various calculation reports
  • Added in the winter and summer calculation reports, tables covering the radiative heat fluxes and the structures used in the non-air conditioned environments
  • Adding the night closing influence in the calculation of the energy dispersed for extra heat flow
  • In accordance with the evaluation "A3" (tailored rating) automatic recalculation of the cold water inlet temperature for energy audit evaluations was eliminated
  • Added ability to select a town from the archive by a double click of the mouse
  • Improved the readability of the table "Final results of the project indicators" present in the various calculation reports
  • In the tables "Energy need input to generators Qx,gn,in [kWh]", "Annual consumption of energy carrier", and "CO2 Annual production [kg]" we added the influence held on all services from CHP unit present plans
  • Restored features in location archive filter to localities not Italian
  • Added to the index value of mechanical ventilation service the global index of total primary energy, is the actual reference building
  • Updated XML files for Energy Certification in the Umbria Region to version 11 (beta 5)
  • Inserted the Fermo province with its location

HVAC Module

  • Added the command icon "Regenerate dimensioned drawing"

Modulo Ht10200

  • Added simplified calculation of inadvertent consumption using the coefficients in Table 10 of the standard

CORRECTIONS

HtCAD Module

  • Calculation report for lighting, correct printing error that led to the repetition of the table "Central"
  • Eliminated warning not required on the non-completion of the temperature difference field in case it does not serve
  • Corrected the error in the editing area of the parameter "Minimum number of consecutive hours for which it has the temperature set-point reduced" tred, min, H in the case of intermittent operation scheme
  • Corrected various errors in the XML export files for the storage of energy performance certificates
  • Corrected error in calculation of the average annual temperature of cold tap water in the case of inputs of climate data from the step-by-step bar
  • Corrected various errors in the energy requirements calculation for locations in the Trento Province
  • Corrected the winter calculation and domestic hot water reports for the unit of measurement of the "Electrical Efficiency CHP unit" and "Thermal efficiency cogeneration unit" fields
  • In legal reports it has been eliminated failure to complete the "Electric power field installed plants fueled by renewable sources [kW]"
  • Eliminated the failure to recalculate the annual average temperature of cold water in case of change of location calculation
  • Correct failure to complete some data in the table "THE ENERGY NEEDS CALCULATION OF LIGHT" in the Reference building report for the energy performance certificate and the Minimum Requirements
  • Upgraded the archival facilities technical standard wording for review to the condensate: Appendix A UNI EN ISO 13788:2013
  • Corrected the climate zone of the Aviano municipality
  • Eliminated the failure to save the "volume flow rate [l/ h]" in a new solar collector
  • Added the municipalities of Molise and Castello di Serravalle
  • Updated the municipality names of San Dorligo della Valle-Dolina and Campolongo Tapogliano
  • Updated the local province of municipalities: Aggius, Aglientu, Agrate Brianza, Aicurzio, Ala dei sardi, Albiate, Andria, Arbus, Arcore, Arzachena, Arzana, Badesi, Sardinia Bari, Barlassina, Barletta, Barumini Baunei, Belgirate, Bellusco , Berchidda, Bernareggio, Besana in Brianza, Biassono, Bisceglie, Bortigiadas, Bosa, Bovisio, Bra, Briosco, Brugherio, Buddusò, Budoni, Buggerru, Burago Di Molgora, Busnago, Caccuri, Calangianus, Calasetta, Camparada, Canosa di Puglia, Caponago, Carate Brianza, Carbonia, Cardedu, Carlisle, Carnate, Castelsilano, Cavenago Di Brianza, Ceredigion, Ceriano Laghetto, Cesano Maderno, Cogliate, Colinas, Concorezzo, Cornate D'adda, Correzzana, Desio, Dinami, Domusnovas, Elini, Escalaplano, Escolca, Esterzili, Philadelphia, Fluminimaggiore, Flowerpot, Francavilla Angitola, Furtei, Gabicce Mare, Gairo, Genoni, Genuri, Gergei, Gesturi, Giba, Sunflower, Giussano, Gulf oranges, Gonnesa, Gonnosfanadiga, Gus, Guspini, Iglesias, Ilbono, Isili , Jerzu, La Maddalena, Laconi Lanusei, Las Plassas, Lazzate, Lentate Sul Seveso, Lesmo, Limbiate, Liss, Loceri, Loiri Porto San Paolo, Lotzorai, Lunamatrona, Luogosanto, Luras, Macherio, Madonna Del Sasso, Magomadas, Margherita di Savoy, Masainas, Meda, Mezzago, Minervino Murge, Misinto, Modolo, Monti, Monticello Brianza, Montresta, Monza, Muggia, Museums, Narcao, Nova Milanese, Nura, Nurallao, Nurri, Nuxis, Olbia, Ornago, Orroli, Oschiri, Osini , Pabillonis, Palau, Pauli Arbarei, Perdasdefogu, Perdaxius, Piscinas, Portoscuso, Portula, Renate, Roncello, Ronco Briantino, Sadali, Sagar, Samassi, San Colombano Al Lambro, San Ferdinando di Puglia, San Gavino Monreale, San Giovanni Suergiu, San Teodoro, Sanfrè, Sanluri, Santa Teresa di Gallura, Santadi, Sant'Anna Arresi, Sant'antioco, Sant'Antonio di Gallura, Sardara, Savelli, Segariu, Seregno, Serramanna, Serrenti, Serri, Setzu, Seui, Seulo, Seveso, Siddi, Sommariva Del Bosco, Sovico, Spinazzola, Sulbiate, Suni, Talana, Telti, Tempio, Tertenia, Tinnura, Tortolì, Trani, Tratalias, Triei, Trinita d'Agultu, Triuggio, Tuili Turri, Ulassai Urzulei, Usmate Velate, Ussaramanna, Ussassai, Varedo Vedano Al Lambro, Veduggio Con Colzano, Verano Brianza, Villa Del Bosco, Villacidro, Villagrande Strisaili, Villamar, Villamassargia, Villanova Tulo, Villanovaforru, Villanovafranca, Villaperuccio, Villasanta, Vimercate
  • Added the project value in summer temperature of the Law Report
  • Updated geographic data municipality names of: Alpago, AltaValle, Haut-Rhin Spa, Plateau, Amblar-Don, Bastida, Bienno, Borgo Churches, Borgo Lares, Borgomezzavalle, Campiglia Cervo, Casciana Lari, Castel Ivano, Castelfranco Piandiscò, Cavallino-Treporti , Cembra Lisignago, Comano Terme, Conta, Cornale, Crespina Lorenzana, Dimaro Folgarida, Di Vergemoli Factories, Fiscaglia, Gordon, Ledro, Lessona, Maccagno with Pino and Veddasca, Madruzzo, Montoro, Mosso, Pratovecchio Stia, Quero Vas, Pieve Di Bono -Price, Poggio Torriana, Polesine Zibello, Primiero San Martino Di Castrozza, Sella Giudicarie, Trecasali Sissa, Tre Ville, Val Di Zoldo, Valdaone, Vallelaghi, Valsamoggia, Valvasone Arzene, Ville D'Anaunia
  • Created in the location archive the province of Monza
  • Corrected error that led to the modification of the reference buildings features in case you operate energy upgrading with thermal insulation, internal opaque surface, or cavity insulation
  • Corrected a typo in the APE (Energy Performance Certificate)
  • Corrected loss of association of the manifold to its manifolds cassette archive
  • Eliminated the verification of the total limit solar transmission factor for windowed components for interventions: "Energetic Requalification" or "Major Renovations Level II"
  • Aggiunti i blocchi CAD mancanti nella directory: C:\ProgramData\Mc4Software\Mc4Suite 2017 ull\databases\Simb-mc4
  • Corrected error in the law report on the non-publication of the electrical output of photovoltaic systems in the section "Description and coverage ratios"
  • Corrected electrical energy distribution error absorbed by the primary pumps that serve more than one service (heating and production of sanitary hot water)
  • Corrected error of the solar collector volumetric flow rate display
  • The clustering for a thermal power station served of the various energy carriers shown in the table "Actual energy" of the Law Report
  • Eliminated the error messages that are generated during the production of winter calculation reports for particular projects
  • Added the missing data in the reference buildings calculation reports for Minimum Requirements for Energy and Certification, related to the ventilation and lighting services
  • Corrected the photovoltaic modules influence in: mechanical ventilation facilities, lighting, and transport for the reference building for Minimum Requirements
  • Corrected the renewable and non-renewable values indexes for the transportation service displayed
  • Corrected the photovoltaic modules influence in the summer air conditioning reference building's for energy certification
  • Corrected the primary energy indexes value for the primary ventilation in case the user has more thermal power plants projects
  • Eliminated the transport service influence in the energy classification of residential buildings
  • Eliminated error in the cold water annual average temperature calculation for those locations that have the same name in the location archive
  • Eliminated the auto-loading failure of the Decree of the Minimum Requirements in the general data for the Ligurian localities
  • Added into the law report that information concerning the generators that were missing.
  • Improve the layout of the Performance and Energy Certificates qualification products according to the National Guidelines of 06/26/2015

Modulo Ht10200

  • Corrected retail yields of radiators according to 10200

HVAC Module

  • Place the load losses in the damper in the channel sizing calculation
  • Removed software fatal error that manifested itself when the user entered an incorrect input in the diffusers archive, in particular defines an overall length of more flanges of the diffuser length
  • Corrected the error in the units of measurement display in the chart available from the calculation of "check + calculate actual capacities" of a water system

New Implementations

HtCAD Module

  • Updated the list of municipalities with the addition of new municipalities and the change of other climate data. Strongly advice to reload the climatic data of the locations in the projects initiated by previous versions of the software.

IMPROVEMENTS

HtCAD Module

  • In the "final results" section of the various calculation reports were displayed related to electricity information exported produced by cogeneration units.
  • Displayed in the winter, summer, and a.c.s. calculation reports the information related to the ventilation of each individual room.
  • Eliminated the requirement to run the drawing write command after modifying the mechanical ventilation data for the energy calculation according to UNI/TS 11300.

CORRECTIONS

  • Corrected the display error in the heat pump data labels with internal combustion engine.
  • Eliminated the thermal bridges placed in an unheated room in the reference buildings and the Minimum Requirements and Energy Performance Certification.
  • Corrected error in the distribution of electricity produced from cogeneration units in the case of simultaneous presence of photovoltaic and cogeneration.
  • Corrected database display problem of the municipalities with the same name.
  • Eliminated calculation results display error in the case id presence of a photovoltaic system can cover 100% of the requirements.
  • Eliminated systematic crash that occurs at the launch of the winter heat losses calculation on some installations.
  • Removed the summer heat maximum load month display error for locations not Italian.
  • Corrected the surface useful value walkable for summer air conditioning if not all areas of a building unit is equipped with facility.

Veneto Regional Energy Statement

  • Correct the exported XML file size for the regional information system.

New Implementations

HtCAD Module

  • Updated the reference building calculation report for the Minimum Requirements and Energy Certification.
  • Explained the items of the conversion factors in primary energy present in the General data.

IMPROVEMENTS

HtCAD Module

  • Updated the province and of belonging Region locations: Novafeltria, San Leo, Maiolo, Talamello, Casteldelci, Sant'Agata Feltria, and Pennabilli.

CORRECTIONS

L10 Appliances (Italian Energy calculation Law No. 10 in 1991)

  • Correct the photovoltaic modules influence in the reference building's lighting services for Energy Certification
  • Removed warning not required on completion of the ventilation data in an unheated room.
  • Removed warning on the thermostatic valve temperature in the case of the presence of heat pumps.
  • Added a filter for profiles displayed relating to thermal loads and to the use of profiles used for the summer power calculation.
  • Removed crash which manifested itself to the passage of data visualization of the effective reference building.
  • Updated summary table of the retaining floors input data.
  • Added the cadastral information in preview video Attestation Energy Performance (APE)
  • Corrected the failure to load the common project's climatic data in Jesolo.
  • Correct loading error of common data with an accent in their name.
  • Correct error in the calculation of the building of reference for the energy performance in the case of heat pump use.
  • Corrected the failure to load the common project's climatic data of the municipalities of Massa and Carrara.
  • Error corrected in loading the relative humidity data for locations other than those of climate data collection.
  • Corrected the reference buildings exchange coefficients printing error.
  • Added energy calculation use for unheated lighting.

Modulo Ht10200

  • Corrected the D.6 formula for the terminal power calculation.

Emilia Romagna Regional Energy Statement

  • Corrected the power consumption calculation of the auxiliary output for the summer air-conditioning service.

HtCad Module Autonomous Province of Trento

  • Restored the possibility of manual creation of the Energy Performance Certificates (APE).

Allineamento alla licenza 2018

Adeguamento

Versione Completa

  • Adeguamento della versione 2017 alla licenza 2018

Corrections

HtCAD Module

  • Corretti errori di calcolo nel valore dei fabbisogni di energia termica utile per i servizi di climatizzazione in regime di calcolo intermittente (A3).
  • Corretti i valori limite per edifici pubblici ed a uso pubblico in Emilia Romagna
  • Corretto errore nella visualizzazione del valore del coefficiente globale di scambio termico per trasmissione (H’T) per l'intero edificio, valore rappresentativo, ma non soggetto a confronto con valor limite.
  • Nella stampa della relazione di calcolo dell'edificio di riferimento per APE corretto il valore riepilogativo del fabbisogno di energia primaria per la climatizzazione invernale.
  • Corretta la funzionalità del wizard per la scelta dell'esponente caratteristico della curva dei terminali presente nei dati tipici dell'impianto termico nel caso di calcolo analitico delle perdite di distribuzione.
  • Corretto errore nel calcolo del fabbisogno energetico nel caso in cui si abbiano ore di non occupazione non nulle in regime di calcolo intermittente (A3).
  • Ripristinata in archivio comuni la visualizzazione dell'irradianza sul piano orizzontale nel mese di massima insolazione.
  • Corretti i valori limite di trasmittanza termica per edifici pubblici in Emilia Romagna.
  • Corretti i valori dei fattori di conversione in energia primaria per il teleriscaldamento esportati nei file XML relativi agli Attestati di Prestazione Energetica.
  • Recepita la revisione alla UNI 10349-1 relativa al valore della pressione di vapore nel mese di Maggio nella località di Carrara.
  • Corretta l'influenza del valore della potenza elettrica delle pompe di circolazione sull'indice di energia primaria per la produzione di acqua calda sanitaria.
  • Corretto errore di stampa del valore degli apporti solari nelle relazioni di calcolo invernale ed estiva.
  • Corretto, per l'applicazione della n. 967 del 20/07/2015, il valore minimo della potenza elettrica rinnovabile da installare.
  • Aggiunti i ponti termici di serramento nel calcolo della trasmittanza termica media di facciata per Riqualificazioni energetiche ed Interventi di ristrutturazione di II livello.
  • Aggiornate le intestazioni ed i piè di pagina della relazione prodotta in archivio strutture.
  • Nelle relazioni di calcolo dei fabbisogni di energia primaria per i vari servizi sostituita la dicitura "totale" con "globale" per quel che riguarda le grandezze date dalla somma dei parametri di vari servizi.
  • Aggiornate le informazioni relative al servizio trasporti esportate nel file XML per la Regione Emilia Romagna.
  • Aggiunte le informazioni relative alla produzione di energia elettrica da moduli fotovoltaici nella relazione di Legge per la Regione Emilia Romagna.

Migliorie/Nuove implementazioni

HtCAD Module

  • Aggiunto un warning che blocca il calcolo ed avvisa nel caso della presenza di serramenti aventi trasmittanza nulla.
  • Aggiunto un warning che blocca il calcolo ed avvisa nel caso di erronea compilazione del campo: Temperatura del fluido di prova circolante nel collettore [°C]
  • Aggiunti warning non bloccanti che avvisano l'utente in caso di mancato collegamento a qualche centrale elettrica di: centrali termiche, moduli fotovoltaici e sistemi di trasporti persone.
  • Aggiornato il file XML, alla versione 5, per gli Attestati di Prestazione Energetica prodotti nelle località della Regione Piemonte
  • Aggiornato il file XML, alla versione 12, per gli Attestati di Prestazione Energetica prodotti nelle località della Regione Marche

Correzioni/migliorie

HtCAD Module

  • Inserita l'influenza dei ponti termici nel calcolo della trasmittanza termica per interventi di "Ristrutturazione importante di II livello" e di "Riqualificazione energetica".
  • Corretta l’influenza dei locali non riscaldati nel calcolo del parametro H’T.
  • Aggiornati i valori limite sull’uso delle fonti rinnovabili in Regione Emilia Romagna.

Corrections

HtCAD Module

  • Corretto il valore dell'indice di energia primaria per la produzione id acqua calda sanitaria nell'attestato di prestazione energetica per la provincia autonoma di Trento.
  • Corretti errori di impaginazione nelle relazioni di calcolo degli edifici di riferimento per i Requisiti Minimi e per la certificazione energetica.
  • Corretto errore nella valutazione degli edifici di riferimento per i Requisiti Minimi e per la certificazione energetica nel caso di "riqualificazione energetica" con "Isolamento termico superficie opaca interna o isolamento intercapedine"
  • Aggiunti i totali stagionali dei valori riportati nelle tabelle: "Fabbisogno ideale di energia termica utile" e "Fabbisogni energetici ed apporti gratuiti" delle relazioni di calcolo degli edifici di riferimento.
  • Corretto il valore degli apporti solari e dell'extraflusso termico per radiazione infrarossa calcolati nei mesi parzialmente riscaldati o raffrescati.
  • Corretto errore di stampa nell'esportazione delle legende dei pannelli radianti nel file in formato "dwg" contenente la visualizzazione 2D del progetto.

Nuove implementazioni/migliorie

HtCAD Module

  • Relazione di calcolo dell'edificio di riferimento per i Requisiti Minimi: aggiunti resoconti di calcolo sui collettori solari, sul bilancio elettrico per l'energia elettrica prodotta on-site e sull'energia assorbita da cogenerazione.

Corrections

HtCAD Module

  • Corrected the Drag & Drop of the archive material structures
  • Reinserted the command functionality: copy-paste applied to the rooms.
  • Added the building address in the exported XML file for SIPEE portal for the Piedmont Region.
  • Corrected error in the distribution on the various spaces of the parts scope of the area.
  • Corrected the functionality of the check box "Fixed data" in "peak ventilation" in the extended data tab.
  • Corrected error in the electric absorption value printing of the auxiliary power supply circuits of thermal batteries in air handling units present in the summer and winter calculation reports.
  • Added warning that alerts the need to create the hydronic networks sizing calculation before producing the print report.
  • Corrected fatal error that is generated to the production of the consequent technical report to an economic assessment of an investment calculation.
  • Prevented the ability to enter a value of no factor equal to 1, illumination, in the extended data environment.
  • Restored the recirculation networks calculation.
  • Removed erroneous room message does not close that it stood at the exposure shift of exchanging borders.
  • In the extended data of the radiator, added fields "Description" and "Code" of the distribution.
  • Restored the placement of radiators and fan-coils at a predetermined distance from the wall.
  • Prolonged the validity, from 12/31/2016 to 12/31/2017, of the share of renewable limit value used for the services of heating, cooling, and domestic hot water, as required by Decree Mille extensions.
  • Corrected various errors in the energy requirements calculation for locations in the Trento Province
  • Removed failure to update the radiant systems list selectable in the case of the same importation in newly created files.
  • Corrected various errors in the XML exported files for SACE of the Emilia Romagna Region portal, including the combined system export.
  • Restored the ability of being able to hid e from view the radiant systems manifolds.
  • Restored the functionality that provides for the updating of building units in the transport list in the event that a change is made.
  • Corrected error involving the erroneous transcription of the time to start and end of winter heating in the winter calculation report.
  • Restored the ability to alter the degree days of a given location.

Corrections

HtCAD Module

  • Added the summer cooling and lighting services in the economic evaluation of energy-improvement measures.
  • Adapted conducting audits on the use of renewable sources to the systems type present in the project.
  • Inserted relevant fuels in boilers present in the database.
  • In the project's general data, eliminated the field "Full performance of the national electricity service", now replaced by the corresponding conversion factor for primary energy required by UNI/TS11300-5.
  • Corrected thermal transmittance calculation of thermal bridges: W13-SER.015 and IF1-SOL.005.
  • Corrected various errors in the economic evaluation procedure improvement initiatives.
  • Eliminated discrepancies in the printing of the dimensional data of some particular projects.
  • Inserted a connection between the change in field "Fraction of time in which it implements the airflow [0..1]" and activate the "Apply" button in the list areas and residential units.
  • Corrected several inaccuracies in the Attestation of Energy Performance Printing (APE)
  • Eliminated repetitions in various calculation reports of projects with more connected thermal power at a power station only.
  • Corrected the production of solar collectors in the case in which there is a solar production not extended to all the plants present for a given service.
  • Reinstated the requirement to enter the area covered only for those interventions that actually require the verification of installed electrical capacity.
  • Restored the calculation method "by standard" of the peak power of a photovoltaic field
  • Corrected the unit of measurement of the fields "Distance from the sea" and "Distance from the town" in the location database.
  • Eliminated the crash for the performance of the special projects law calculations.
  • Corrected the cooling zones period calculation with special conditions of thermal exchange.
  • In the Building Unit of the Radiant tab, under the heading "Type of installation" of the prevailing wall and additional partition wall, replaced the "preformed" option with "Prefabricated"
  • Eliminated the error for which the printing of solar projects in applications of the AutoCAD environment was sometimes produced without values.
  • Restored the ability to define photovoltaic modules with negative orientations.

FIreCAD Module

  • Restored the calculation with equivalent lengths of special pieces

Corrections

HtCAD Module

  • Corrected the allocation of wind zone of the various locations
  • Restored the calculation method "by standard" of the peak power of a photovoltaic field
  • Made visible again the value of the Primary Energy Saving (PES) of dual generator units
  • Eliminated the inability to select locations with the same name with special characters

New Implementations

HtCAD Module

  • Upgrade to Resolution 1515 of 09/02/2016 of the Autonomous Province of Trento.
  • Implemented the Regional Law n. 32 of 12/07/2016 of the Liguria Region. (*)
  • Implemented the D.G.R. n. 1715 of 10/24/2016 from the Emilia Romagna Region.
  • (*) The user is cautioned that selecting any location in the Liguria Region, the necessary capabilities to operate in accordance with the regional law will be operational while reading "DM Minimum requirements of 06/26/2015" in the general data of the project.

Improvements

HtCAD Module

  • Introduced the consumption for mechanical ventilation service between consumption adopted for the economic evaluation of energy-improvement measures.
  • Changed the definition mask of pipe systems present in the project. Adding the power plant and the ability to associate the services of mechanical ventilation, lighting, and transportation.
  • Added to the total of the share of renewable energy used in service at the relevant tables in the various calculation reports.

Corrections

HtCAD Module

  • Corrected the latitude of Tremezzina.
  • Elimination of the fatal error presented with the Attestation manual compilation of Energy Performance.
  • Included in the energy performance for central heating of the Autonomous Province of Trento the produced annual renewable energy has been added.
  • Corrected the index verification of useful energy in the winter verification of the NZEB buildings
  • Corrected the error in the compilation of the limit values of energy indicators for some special projects.
  • Corrected the index limit value of primary energy to be respected in the case of non-use of renewable sources, as required by the Ministerial Decree of Minimum Requirements.
  • In the case of energy upgrading made visible in the global performance values results mask with the respective limit values.
  • Corrected the display of special characters in the warnings list.
  • Entered the correct number of decimal in the electricity exported to the XML file produced by the Veneto Region.
  • Corrected the daily distribution of the time profile used for the calculation of thermal loads with the ASHRAE method.
  • Corrected the electric power value reported in the column Nominal power kW of the Attestation Performance Energy.
  • Corrected the value of electricity exported to the XML file for the Emilia Romagna Region.
  • Corrected the formula application (9) and (10) of the UNI/TS 11300:-1:2014.
  • Corrected the degrees in temperature in Viggianello.
  • Inserted the influence of thermal bridges in the transmission average value exported in the XML files produced for the Emilia Romagna Region.
  • Corrected the power consumption calculation of the auxiliary output for the summer air-conditioning service.
  • Corrected the dry bulb external winter temperatures value in Lamezia Terme.
  • Eliminated a discrepancy between transmittance display screen checks and reported in the press in building renovation interventions.

Duct Module

  • Corrected the metric calculation of the material in the channel release mask.

New Implementations

IMPROVEMENTS

HtCAD Module

  • Increased the default value of the accuracy of the materials thickness, roughness, and viscosity fields
  • Entered the unit of measure of the size "Recovery" in the calculation mask air systems in the AHU General Data
  • Improved the readability of the table with the dispersion coefficients for transmission in the calculation report in intermittent duty
  • Inserted seasonal total energy requirements listed in the tables "Energy Needs and free contributions" and "Needs ideal useful thermal energy" present in the winter and summer calculation reports
  • It increases the accuracy of the "Nu" field for the domestic hot water requirements for the destinations of nonresidential use
  • Updated the items loaded in the heat pumps archive
  • To assist the user in understanding of the errors committed, as well as display an appropriate warning for the results of previous calculations of the law are also hidden in the event that there is an input error that prevents the calculation
  • Added detail of ''Energy export produced in-situ" in the tables "Primary energy not renewable annual absorbed EP, NREN [kWh]","Annual renewable primary energy consumption EP, REN [kWh]", and "Total annual primary energy consumption EP, TOT [kWh]" in the various calculation reports
  • Added in the winter and summer calculation reports, tables covering the radiative heat fluxes and the structures used in the non-air conditioned environments
  • Adding the night closing influence in the calculation of the energy dispersed for extra heat flow
  • In accordance with the evaluation "A3" (tailored rating) automatic recalculation of the cold water inlet temperature for energy audit evaluations was eliminated
  • Added ability to select a town from the archive by a double click of the mouse
  • Improved the readability of the table "Final results of the project indicators" present in the various calculation reports
  • In the tables "Energy need input to generators Qx,gn,in [kWh]", "Annual consumption of energy carrier", and "CO2 Annual production [kg]" we added the influence held on all services from CHP unit present plans
  • Restored features in location archive filter to localities not Italian
  • Added to the index value of mechanical ventilation service the global index of total primary energy, is the actual reference building
  • Updated XML files for Energy Certification in the Umbria Region to version 11 (beta 5)
  • Inserted the Fermo province with its location

HVAC Module

  • Added the command icon "Regenerate dimensioned drawing"

Modulo Ht10200

  • Added simplified calculation of inadvertent consumption using the coefficients in Table 10 of the standard

CORRECTIONS

HtCAD Module

  • Calculation report for lighting, correct printing error that led to the repetition of the table "Central"
  • Eliminated warning not required on the non-completion of the temperature difference field in case it does not serve
  • Corrected the error in the editing area of the parameter "Minimum number of consecutive hours for which it has the temperature set-point reduced" tred, min, H in the case of intermittent operation scheme
  • Corrected various errors in the XML export files for the storage of energy performance certificates
  • Corrected error in calculation of the average annual temperature of cold tap water in the case of inputs of climate data from the step-by-step bar
  • Corrected various errors in the energy requirements calculation for locations in the Trento Province
  • Corrected the winter calculation and domestic hot water reports for the unit of measurement of the "Electrical Efficiency CHP unit" and "Thermal efficiency cogeneration unit" fields
  • In legal reports it has been eliminated failure to complete the "Electric power field installed plants fueled by renewable sources [kW]"
  • Eliminated the failure to recalculate the annual average temperature of cold water in case of change of location calculation
  • Correct failure to complete some data in the table "THE ENERGY NEEDS CALCULATION OF LIGHT" in the Reference building report for the energy performance certificate and the Minimum Requirements
  • Upgraded the archival facilities technical standard wording for review to the condensate: Appendix A UNI EN ISO 13788:2013
  • Corrected the climate zone of the Aviano municipality
  • Eliminated the failure to save the "volume flow rate [l/ h]" in a new solar collector
  • Added the municipalities of Molise and Castello di Serravalle
  • Updated the municipality names of San Dorligo della Valle-Dolina and Campolongo Tapogliano
  • Updated the local province of municipalities: Aggius, Aglientu, Agrate Brianza, Aicurzio, Ala dei sardi, Albiate, Andria, Arbus, Arcore, Arzachena, Arzana, Badesi, Sardinia Bari, Barlassina, Barletta, Barumini Baunei, Belgirate, Bellusco , Berchidda, Bernareggio, Besana in Brianza, Biassono, Bisceglie, Bortigiadas, Bosa, Bovisio, Bra, Briosco, Brugherio, Buddusò, Budoni, Buggerru, Burago Di Molgora, Busnago, Caccuri, Calangianus, Calasetta, Camparada, Canosa di Puglia, Caponago, Carate Brianza, Carbonia, Cardedu, Carlisle, Carnate, Castelsilano, Cavenago Di Brianza, Ceredigion, Ceriano Laghetto, Cesano Maderno, Cogliate, Colinas, Concorezzo, Cornate D'adda, Correzzana, Desio, Dinami, Domusnovas, Elini, Escalaplano, Escolca, Esterzili, Philadelphia, Fluminimaggiore, Flowerpot, Francavilla Angitola, Furtei, Gabicce Mare, Gairo, Genoni, Genuri, Gergei, Gesturi, Giba, Sunflower, Giussano, Gulf oranges, Gonnesa, Gonnosfanadiga, Gus, Guspini, Iglesias, Ilbono, Isili , Jerzu, La Maddalena, Laconi Lanusei, Las Plassas, Lazzate, Lentate Sul Seveso, Lesmo, Limbiate, Liss, Loceri, Loiri Porto San Paolo, Lotzorai, Lunamatrona, Luogosanto, Luras, Macherio, Madonna Del Sasso, Magomadas, Margherita di Savoy, Masainas, Meda, Mezzago, Minervino Murge, Misinto, Modolo, Monti, Monticello Brianza, Montresta, Monza, Muggia, Museums, Narcao, Nova Milanese, Nura, Nurallao, Nurri, Nuxis, Olbia, Ornago, Orroli, Oschiri, Osini , Pabillonis, Palau, Pauli Arbarei, Perdasdefogu, Perdaxius, Piscinas, Portoscuso, Portula, Renate, Roncello, Ronco Briantino, Sadali, Sagar, Samassi, San Colombano Al Lambro, San Ferdinando di Puglia, San Gavino Monreale, San Giovanni Suergiu, San Teodoro, Sanfrè, Sanluri, Santa Teresa di Gallura, Santadi, Sant'Anna Arresi, Sant'antioco, Sant'Antonio di Gallura, Sardara, Savelli, Segariu, Seregno, Serramanna, Serrenti, Serri, Setzu, Seui, Seulo, Seveso, Siddi, Sommariva Del Bosco, Sovico, Spinazzola, Sulbiate, Suni, Talana, Telti, Tempio, Tertenia, Tinnura, Tortolì, Trani, Tratalias, Triei, Trinita d'Agultu, Triuggio, Tuili Turri, Ulassai Urzulei, Usmate Velate, Ussaramanna, Ussassai, Varedo Vedano Al Lambro, Veduggio Con Colzano, Verano Brianza, Villa Del Bosco, Villacidro, Villagrande Strisaili, Villamar, Villamassargia, Villanova Tulo, Villanovaforru, Villanovafranca, Villaperuccio, Villasanta, Vimercate
  • Added the project value in summer temperature of the Law Report
  • Updated geographic data municipality names of: Alpago, AltaValle, Haut-Rhin Spa, Plateau, Amblar-Don, Bastida, Bienno, Borgo Churches, Borgo Lares, Borgomezzavalle, Campiglia Cervo, Casciana Lari, Castel Ivano, Castelfranco Piandiscò, Cavallino-Treporti , Cembra Lisignago, Comano Terme, Conta, Cornale, Crespina Lorenzana, Dimaro Folgarida, Di Vergemoli Factories, Fiscaglia, Gordon, Ledro, Lessona, Maccagno with Pino and Veddasca, Madruzzo, Montoro, Mosso, Pratovecchio Stia, Quero Vas, Pieve Di Bono -Price, Poggio Torriana, Polesine Zibello, Primiero San Martino Di Castrozza, Sella Giudicarie, Trecasali Sissa, Tre Ville, Val Di Zoldo, Valdaone, Vallelaghi, Valsamoggia, Valvasone Arzene, Ville D'Anaunia
  • Created in the location archive the province of Monza
  • Corrected error that led to the modification of the reference buildings features in case you operate energy upgrading with thermal insulation, internal opaque surface, or cavity insulation
  • Corrected a typo in the APE (Energy Performance Certificate)
  • Corrected loss of association of the manifold to its manifolds cassette archive
  • Eliminated the verification of the total limit solar transmission factor for windowed components for interventions: "Energetic Requalification" or "Major Renovations Level II"
  • Aggiunti i blocchi CAD mancanti nella directory: C:\ProgramData\Mc4Software\Mc4Suite 2017 ull\databases\Simb-mc4
  • Corrected error in the law report on the non-publication of the electrical output of photovoltaic systems in the section "Description and coverage ratios"
  • Corrected electrical energy distribution error absorbed by the primary pumps that serve more than one service (heating and production of sanitary hot water)
  • Corrected error of the solar collector volumetric flow rate display
  • The clustering for a thermal power station served of the various energy carriers shown in the table "Actual energy" of the Law Report
  • Eliminated the error messages that are generated during the production of winter calculation reports for particular projects
  • Added the missing data in the reference buildings calculation reports for Minimum Requirements for Energy and Certification, related to the ventilation and lighting services
  • Corrected the photovoltaic modules influence in: mechanical ventilation facilities, lighting, and transport for the reference building for Minimum Requirements
  • Corrected the renewable and non-renewable values indexes for the transportation service displayed
  • Corrected the photovoltaic modules influence in the summer air conditioning reference building's for energy certification
  • Corrected the primary energy indexes value for the primary ventilation in case the user has more thermal power plants projects
  • Eliminated the transport service influence in the energy classification of residential buildings
  • Eliminated error in the cold water annual average temperature calculation for those locations that have the same name in the location archive
  • Eliminated the auto-loading failure of the Decree of the Minimum Requirements in the general data for the Ligurian localities
  • Added into the law report that information concerning the generators that were missing.
  • Improve the layout of the Performance and Energy Certificates qualification products according to the National Guidelines of 06/26/2015

Modulo Ht10200

  • Corrected retail yields of radiators according to 10200

HVAC Module

  • Place the load losses in the damper in the channel sizing calculation
  • Removed software fatal error that manifested itself when the user entered an incorrect input in the diffusers archive, in particular defines an overall length of more flanges of the diffuser length
  • Corrected the error in the units of measurement display in the chart available from the calculation of "check + calculate actual capacities" of a water system

New Implementations

HtCAD Module

  • Updated the list of municipalities with the addition of new municipalities and the change of other climate data. Strongly advice to reload the climatic data of the locations in the projects initiated by previous versions of the software.

IMPROVEMENTS

HtCAD Module

  • In the "final results" section of the various calculation reports were displayed related to electricity information exported produced by cogeneration units.
  • Displayed in the winter, summer, and a.c.s. calculation reports the information related to the ventilation of each individual room.
  • Eliminated the requirement to run the drawing write command after modifying the mechanical ventilation data for the energy calculation according to UNI/TS 11300.

CORRECTIONS

  • Corrected the display error in the heat pump data labels with internal combustion engine.
  • Eliminated the thermal bridges placed in an unheated room in the reference buildings and the Minimum Requirements and Energy Performance Certification.
  • Corrected error in the distribution of electricity produced from cogeneration units in the case of simultaneous presence of photovoltaic and cogeneration.
  • Corrected database display problem of the municipalities with the same name.
  • Eliminated calculation results display error in the case id presence of a photovoltaic system can cover 100% of the requirements.
  • Eliminated systematic crash that occurs at the launch of the winter heat losses calculation on some installations.
  • Removed the summer heat maximum load month display error for locations not Italian.
  • Corrected the surface useful value walkable for summer air conditioning if not all areas of a building unit is equipped with facility.

Veneto Regional Energy Statement

  • Correct the exported XML file size for the regional information system.

New Implementations

HtCAD Module

  • Updated the reference building calculation report for the Minimum Requirements and Energy Certification.
  • Explained the items of the conversion factors in primary energy present in the General data.

IMPROVEMENTS

HtCAD Module

  • Updated the province and of belonging Region locations: Novafeltria, San Leo, Maiolo, Talamello, Casteldelci, Sant'Agata Feltria, and Pennabilli.

CORRECTIONS

L10 Appliances (Italian Energy calculation Law No. 10 in 1991)

  • Correct the photovoltaic modules influence in the reference building's lighting services for Energy Certification
  • Removed warning not required on completion of the ventilation data in an unheated room.
  • Removed warning on the thermostatic valve temperature in the case of the presence of heat pumps.
  • Added a filter for profiles displayed relating to thermal loads and to the use of profiles used for the summer power calculation.
  • Removed crash which manifested itself to the passage of data visualization of the effective reference building.
  • Updated summary table of the retaining floors input data.
  • Added the cadastral information in preview video Attestation Energy Performance (APE)
  • Corrected the failure to load the common project's climatic data in Jesolo.
  • Correct loading error of common data with an accent in their name.
  • Correct error in the calculation of the building of reference for the energy performance in the case of heat pump use.
  • Corrected the failure to load the common project's climatic data of the municipalities of Massa and Carrara.
  • Error corrected in loading the relative humidity data for locations other than those of climate data collection.
  • Corrected the reference buildings exchange coefficients printing error.
  • Added energy calculation use for unheated lighting.

Modulo Ht10200

  • Corrected the D.6 formula for the terminal power calculation.

Emilia Romagna Regional Energy Statement

  • Corrected the power consumption calculation of the auxiliary output for the summer air-conditioning service.

HtCad Module Autonomous Province of Trento

  • Restored the possibility of manual creation of the Energy Performance Certificates (APE).