Videos
 
 
 
 
 
 Type Technical Video: All    
Sort newest to oldest Sort oldest to newest  1 | 2 | 3
 
Internal Design Condition Internal Design Condition
Building - For versions: 2010

In this video you will find the information about how to set the internal design condition of each space of the building.

 
 
Loads calculation & Reports Loads calculation & Reports
Building - For versions: 2010

Check the results and print the reports.

 
 
Project Settings Project Settings
Radiant Panels - For versions: 2010

In this video we will set all the basic information to perform a radiant floor heating system dimensioning.

 
 
Radiant Area Detecting Radiant Area Detecting
Radiant Panels - For versions: 2010

This video shows you how to identify the radiant area (RayArea) of a specific space and how to set the spacing parameters which affect the maximum output allowed (maximum floor temperature).

 
 
Multiple RayAreas Multiple RayAreas
Radiant Panels - For versions: 2010

In this video you will see how to supply the same room with two different manifolds (divide the main radiant area/rayarea in two different rayareas).

 
 
Manifold Displacement Manifold Displacement
Radiant Panels - For versions: 2010

Manifolds positioning is what is displayed in this video.

 
 
Manifold-RayArea Association Manifold-RayArea Association
Radiant Panels - For versions: 2010

This video shows how to connect the rayarea to its supplying manifold. This operation is mandatory for the system sizing.

 
 
System Sizing System Sizing
Radiant Panels - For versions: 2010

In this video the user will see how to set the supplying temperature, force a particular spacing override the heat rate required if necessary. The operations displayed in this video are really important for the comprehension of the program sizing process.

 
 
Circuit Drawing – Live Serpentine Circuit Drawing – Live Serpentine
Radiant Panels - For versions: 2010

This video shows you how to let the program draw the circuits inside a certain rayarea by using Live Serpentine command. It shows you how to get the desired layout and how to check all the solutions the program is able to produce.

 
 
Circuit Editing Circuit Editing
Radiant Panels - For versions: 2010

In this video we go through all different ways to manipulate the automatic circuit drawing made by the program. You will learn how to change parameters in order to better fill the area or how to manually draw part of circuits and add them to the main circuit.

 
 
Leaders Drawing Leaders Drawing
Radiant Panels - For versions: 2010

This video shows you how to draw (with two different approaches) the leaders of the circuits and how to edit them and set different spacing parameters.

 
 
Circuits Auto Balancing Circuits Auto Balancing
Radiant Panels - For versions: 2010

Break Circuit option. In this video you will see how the Break Circuit option produces more balanced circuits (same length).

 
 
Tip Tip
Radiant Panels - For versions: 2010

Edit the rayarea shape by avoiding small steps, due to a non-perfect input of the walls, which may produce a non-realistic pipe layout.

 
 
Calculation Results and BOM Reports Calculation Results and BOM Reports
Radiant Panels - For versions: 2010

This video will show you how to check the results on the screen and how to produce the Bill of Material of the radiant system and print the dedicated report.

 
 
Project Settings Project Settings
Plumbing - For versions: 2010

In this video we will set all the preliminary information to perform a plumbing system sizing.

 
 
Pipe Library Overview Pipe Library Overview
Plumbing - For versions: 2010

This video shows how to edit the parameters of the pipe into its library manager window.

 
 
Fixtures Unit Library Fixtures Unit Library
Plumbing - For versions: 2010

Select the fixture from the pre-loaded list of fixture and set graphical and calculation parameters.

 
 
Fixtures Drawing Fixtures Drawing
Plumbing - For versions: 2010

This video shows you how to add fixtures to the project and how to displace them correctly.

 
 
Cold Line Pipe Drawing Cold Line Pipe Drawing
Plumbing - For versions: 2010

This video shows how to draw a pipe at different elevation and connect the fixtures. Additionally you will see how to add manifolds to the distribution.

 
 
Cold Line Dimensioning Cold Line Dimensioning
Plumbing - For versions: 2010

This video will show you how to size the cold line pipes only.

 
 
 
copyright Mc4Software 1983-2017 P.iva IT07605790018   rel 4.0 disclaimer privacy credits cookie